To: nv-l@ucsbvm.ucsb.edu
cc:
From: Diego S Del Castillo/Venezuela/IBM @ IBMVE
In order to delete Tivoli from an AIX box, besides deleting the files (by
the way, there are some files in /usr/lib/X11/app-config or something like
that), you need to remove the Tivoli entries added on the following files:
/etc/rc.nfs (to start the oserv at restart)
/etc/services (to make clear to everybody that port 94 (by default) is
being used by the oserv)
/etc/inetd.conf (to allow the remote start/stop of the oserv)
Saludos/Regards...
Diego del Castillo Phone: +58(2)9088443 TieLine: 777-8443
Notes: Diego S Del Castillo/Venezuela/IBM@IBMVE
Internet Mail: diegodc@ve.ibm.com
*-- TO SAVE THE EARTH, HUMANS MUST DIE!!! --*
____ BEGIN OF FORWARDED MESSAGE___
Date: Wed, 26 Aug 1998 17:31:28 +1000
From: Simon Long <simon@NETTRACK.COM.AU>
Subject: Framework V3.2 for AIX Install Failure
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi,
Working on installing the Framework tool upon an F50/7025 running
AIX 4.2.1 I have observed the process failing during the "Distributing
Architecture Specific Server Database" stage. The failure seems
to be first ocurring at line 252 of install.cfg ( Post Config script ).
No
"wlookup" attempts seem to be working ( ie. a screen-full of possible
reasons for why it may be failing is produced ). Even "wlookup -a"
bears
no fruit. We have done and seen different things, and it is only fair
in
asking for help to describe these things for you:-
1. Upon initial install encountered a failure and attempted another
2. Upon 2nd attempt the /tmp filesystem filled up and the install
hung ( Note the cleanup approach used in point 33, below,
was not used entirely in this instance )..
3. Process for removing Framework to allow for re-installation:-
cd /
/etc/Tivoli/oserv.rc stop
umount /tmp/tmeCDROM
rm -r /usr/local/Tivoli
rm -r /tmp/.tivoli
rm -r /var/spool/Tivoli
Is this inadequate to prepare the machine for re-installation of the
Framework product.
4. Things tried:-
i. checked name resolution in conformance with install book
- DNS based - seemed OK
ii. changed from simple encryption to none
iii. changed server specification from intra domain
convention to fully denoted on install panel.
iv. tried with/without license key
We previously installed the Framework V3.2 product onto
a 570 AIX 4.2.1 machine with no problems.
Can someone help - this is a very frustrating problem. Thanks,
Simon Long
Nettrack Technical Solutions Pty Ltd
___ END OF FORWARDED MESSAGE___
|