Alexis,
I am assuming you are not using a seed file.
Normally NV stops at the local routers, just showing the "other" networks connected with your LAN.
Is this your case? If not, there may be a problem with your router configuration or the problem may be originated by network congestion. 
Try increasing the discovery timeout value to 2 or 3 seconds (snmp configuration).
I hope this can help you.

	Gianni
----------
From: 	avillagra
Sent: 	Tuesday, August 04, 1998 10:54 PM
To: 	NV-L
Cc: 	avillagra
Subject: 	I do not see the other networks

Dear People:
I have version 4.0 installed, and I see the local network, but the wan
networks do not appear
in my map.
The file that contains the gateway to the other networks is OK.
I can do ping and also snmpwal to machines in those networks, but they
still do not appear.
Do you have any ideas on what is happening?
Thnaks in Advance

> ALEXIS VILLAGRA
> Soporte de Plataforma
> GMD
> 
> República de Panamá 4069 - Lima 34
> *     225-0011   ext.  233  
>  Fax   446-9667
> * avillagra@gmd.com.pe
>