It's the process Rnvgate that's timing out, not the PSMs. This has been
seen and is supposed to be fixed in 1.2.2. Probably you have too little
memory relative to the size of your database. If you kill the Rnvgate
process, it will be automatically restarted. You could write a little
akw script that would run periodically and you wouldn't miss a beat.
ahmdbserver is another issue- It prereqs ahmtopod, which starts up later
under cmld. ahmtopod has internal code that runs ovstart ahmdbserver, so
it probably starts later, after your message.
Hope this helps.
Rob Rinear wrote:
>
> I'm using NWays 1.2.1 with NV 5.0 (AIX 4.2) and having problems with the
> Management Application Transporter. On a regular basis, the IBM Product
> Specific Modules will timeout doing configuration and status polls. If I
> stop & restart the Application Transport, all is well again. This seems to
> happen at least once a day.
>
> I've also noticed that the ahmdbserver daemon will not start...status is
> exit(99).
>
> I'm not sure if these are related, but suggestions on either would be
> appreciated.
>
> Rob Rinear
> Dirigo Incorporated
> Systems and Network Management Solutions
> (513) 421-6500
> robr@dirigo.com
> http://www.dirigo.com
|