Hi everybody.
I am looking for a hint to make netview (5.1 for Windows NT) discover a
FRAD (Frame Relay Access Device) from Nortel.
I have already changed the following files:
Oid_to_type
1.3.6.1.4.1.335.1.1.3:Nortel:Nortel:G # Nortel
Oid_to_sym
1.3.6.1.4.1.335.1.1.3:Connector:Gateway # Nortel
Ovw_fiels with "Nortel"
Snmp_fields with "Nortel"
I found the following message on NV.LOG:
01/11/99 15:18:49 [netmon] WARNING: endSnmpOperation: interface 10.32.98.1
with invalid mask 0.0.0.0; not adding to topology.
With SNMPWALK I found the following:
system.sysObjectID.0 : OBJECT IDENTIFIER:
.iso.org.dod.internet.private.enterprises.micom.products.marathon-netrunner.3
.
.ipAddrEntry.ipAdEntAddr.10.32.98.1 : IpAddress: 10.32.98.1
.ipAddrEntry.ipAdEntAddr.200.10.20.1 : IpAddress: 200.10.20.1
.ipAddrEntry.ipAdEntIfIndex.10.32.98.1 : INTEGER: 1
.ipAddrEntry.ipAdEntIfIndex.200.10.20.1 : INTEGER: 2
.ipAddrEntry.ipAdEntNetMask.10.32.98.1 : IpAddress: 255.255.255.0
.ipAddrEntry.ipAdEntNetMask.200.10.20.1 : IpAddress: 255.255.255.0
.ipAddrEntry.ipAdEntBcastAddr.10.32.98.1 : IpAddress: 10.32.98.255
.ipAddrEntry.ipAdEntBcastAddr.200.10.20.1 : IpAddress: 200.10.20.255
Thank you for your attention.
Carlos Lima Dias
-------------------------------------------
Carlos Lima Dias
Suporte Técnico
mailto:Carlos@Compscientia.com.br
Interconnection informática Ltda
Rio de Janeiro - Brasil
Tel: 55 (021) 558-1004
Fax: 55 (021) 558-2270
-------------------------------------------
|