Carlos, I asked the question in hopes that someone else would spot the
problem. I hope
you have called support by now, or Nortel. If this were Netview for AIX, I
would guess that
the device does not have ipforwarding enabled, however you do that on such
a device.
I had saved the thread and have attached it below. Nothing looks obviously
wrong to me.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Hi everybody,
Some weeks ago I posted a problem regarding Netview not being able
to find
a Nortel FRAD correctly. Netview created one device for each interface.
Leslie A. Clark asked me for the interface table of the device. I
posted
it but due to problems on my e-mail system I lost the thread.
Any way, I found the following:
interfaces.ifTable.ifEntry.ifType.1 : INTEGER: ethernet-csmacd
interfaces.ifTable.ifEntry.ifType.2 : INTEGER: 0
Is the ifType.2=0 the cause of the problem?
Thank you for your attention.
Best regards,
Carlos Lima Dias
Hi Leslie,
Following is the output of the snmpwalk interfaces:
interfaces.ifNumber.0 : INTEGER: 2
interfaces.ifTable.ifEntry.ifIndex.1 : INTEGER: 1
interfaces.ifTable.ifEntry.ifIndex.2 : INTEGER: 2
interfaces.ifTable.ifEntry.ifDescr.1 : DISPLAY STRING- (ascii): LAN
interfaces.ifTable.ifEntry.ifDescr.2 : DISPLAY STRING- (ascii): WAN
interfaces.ifTable.ifEntry.ifType.1 : INTEGER: ethernet-csmacd
interfaces.ifTable.ifEntry.ifType.2 : INTEGER: 0
interfaces.ifTable.ifEntry.ifMtu.1 : INTEGER: 1500
interfaces.ifTable.ifEntry.ifMtu.2 : INTEGER: 1500
interfaces.ifTable.ifEntry.ifSpeed.1 : Gauge: 10000000
interfaces.ifTable.ifEntry.ifSpeed.2 : Gauge: 0
interfaces.ifTable.ifEntry.ifPhysAddress.1 : OCTET STRING- (hex): length
= 6
0: 00 40 c5 11 46 db -- -- -- -- -- -- -- -- -- --
.@..F...........
interfaces.ifTable.ifEntry.ifPhysAddress.2 : OCTET STRING- (hex): length
= 6
0: 00 40 c5 11 46 db -- -- -- -- -- -- -- -- -- --
.@..F...........
interfaces.ifTable.ifEntry.ifAdminStatus.1 : INTEGER: up
interfaces.ifTable.ifEntry.ifAdminStatus.2 : INTEGER: up
interfaces.ifTable.ifEntry.ifOperStatus.1 : INTEGER: up
interfaces.ifTable.ifEntry.ifOperStatus.2 : INTEGER: up
interfaces.ifTable.ifEntry.ifLastChange.1 : Timeticks: (0) 0:00:00.00
interfaces.ifTable.ifEntry.ifLastChange.2 : Timeticks: (0) 0:00:00.00
After a few days, Netview created one object for each interface
with the
router symbol. Attached is the output of the ovobjprint for both objects.
Thank you for your attention.
Best regards,
Carlos Lima Dias
At 06:36 14/01/99 -0500, you wrote:
>
>
>What does the interface table say?
>
>Cordially,
>
>Leslie A. Clark
>IBM Global Services - Systems Mgmt & Networking
>
>
>
> Hi everybody.
>
> I am looking for a hint to make netview (5.1 for Windows NT)
>discover a
>FRAD (Frame Relay Access Device) from Nortel.
>
> I have already changed the following files:
>
>Oid_to_type
>1.3.6.1.4.1.335.1.1.3:Nortel:Nortel:G # Nortel
>
>Oid_to_sym
>1.3.6.1.4.1.335.1.1.3:Connector:Gateway # Nortel
>
>Ovw_fiels with "Nortel"
>
>Snmp_fields with "Nortel"
>
> I found the following message on NV.LOG:
>01/11/99 15:18:49 [netmon] WARNING: endSnmpOperation: interface 10.32.98.1
>with invalid mask 0.0.0.0; not adding to topology.
>
> With SNMPWALK I found the following:
>system.sysObjectID.0 : OBJECT IDENTIFIER:
>.iso.org.dod.internet.private.enterprises.micom.products.marathon-netrunne
r
>.3
>.
>.ipAddrEntry.ipAdEntAddr.10.32.98.1 : IpAddress: 10.32.98.1
>.ipAddrEntry.ipAdEntAddr.200.10.20.1 : IpAddress: 200.10.20.1
>.ipAddrEntry.ipAdEntIfIndex.10.32.98.1 : INTEGER: 1
>.ipAddrEntry.ipAdEntIfIndex.200.10.20.1 : INTEGER: 2
>.ipAddrEntry.ipAdEntNetMask.10.32.98.1 : IpAddress: 255.255.255.0
>.ipAddrEntry.ipAdEntNetMask.200.10.20.1 : IpAddress: 255.255.255.0
>.ipAddrEntry.ipAdEntBcastAddr.10.32.98.1 : IpAddress: 10.32.98.255
>.ipAddrEntry.ipAdEntBcastAddr.200.10.20.1 : IpAddress: 200.10.20.255
>
>Thank you for your attention.
>
>Carlos Lima Dias
>-------------------------------------------
>Carlos Lima Dias
>Suporte Técnico
>mailto:Carlos@Compscientia.com.br
>Interconnection informática Ltda
>Rio de Janeiro - Brasil
>Tel: 55 (021) 558-1004
>Fax: 55 (021) 558-2270
>-------------------------------------------
>
>
Ovobj1.txt
Description: Text - character set unknown
-------------------------------------------
Carlos Lima Dias
Suporte Técnico
mailto:Carlos@Compscientia.com.br
Interconnection informática Ltda
Rio de Janeiro - Brasil
Tel: 55 (021) 558-1004
Fax: 55 (021) 558-2270
-------------------------------------------
|