I'm using Netview/Nt as well, *and* sent you the wrong address - it's
ftp://ftp.cisco.com/pub/mibs/ . You'll definitely want to check out the
/supportlists subdirectory. Also, have a look at cisco's document entitled
"Introduction to Cisco MIBs" - the url for it got chopped off on my copy,
but it starts
http://www.cisco.com/univercd/cd/td/doc/product/lan/cat5000/c5k3../mover.ht
blah blah. Best to do a search from cisco's home page.
What are trying exactly to do with your cisco devices? I only ask because I
originally sought out to get rid of those annoying "DEFAULT FMT" trap
messages netview's event browser kept displaying for my 3600 series routers.
After loading *all* of the mibs for that router as specified in the support
list, I eventually cheated and just added the oid for the router to my
trapd.conf file (I know, I should have also monkeyed with oidtotype), and
specified the "authentication failure", "link up", and "link down" traps.
Proceded to eliminate some 80% of the "default fmt" messages. This, of
course, represents the quick-and-dirty approach.
> -----Original Message-----
> From: Todd E. Lewis [SMTP:telewis@PROVIDENTBANKMD.COM]
> Sent: Tuesday, April 13, 1999 11:24 AM
> To: NV-L@UCSBVM.ucsb.edu
> Subject: Re: Does anyone know what mib/trap files from cisco and bay
> workwith Netview for NT 5.1?
>
> We have cisco 7000,7513,2503 mostly. Cisco's site talks about mibs but
> they appear to be used with HPOV or UNIX version Netview. Do you know of a
> specific on that will work with the models I listed and NEtview for NT?
>
> >>> OGrant <OGrant@PEC.COM> 04/13 11:06 AM >>>
> Regarding cisco, have you checked out http://www.cisco.com/public/mibs/ ?
> Not knowing what type of equipment you have, it may be worth a look -
> Oliver
> Grant
>
> > -----Original Message-----
> > From: Todd E. Lewis [SMTP:telewis@PROVIDENTBANKMD.COM]
> > Sent: Tuesday, April 13, 1999 10:35 AM
> > To: NV-L@UCSBVM.ucsb.edu
> > Subject: Does anyone know what mib/trap files from cisco and bay
> work
> > with Netview for NT 5.1?
> >
> > Does anyone know what mib/trap files from cisco and bay work with
> Netview
> > for NT 5.1?
|