Hi All,
We are running our Netview server on an RS/6000 F50 and Remedy ARS on an
RS/6000 E30. Remedy ARS passes traps (a.k.a. Auto-IR's) from the E30 to
the F50. We've previously (a very long time ago) had both software
packages running on one server (which worked fine) and would like to do
this once again. Unfortunately, during our tests to integrate the two
products onto one server, the traps/auto-ir's are not being raised
anymore.
Does anybody have suggestions on what the problem could be ???
Your help will really be appreciated.
Thanx, in advance !!!
Lailaa Fraser
===============================================================================
The Foschini Group (Pty) Ltd disclaim all liability for any loss, damage or
expense however caused, arising from the use of or reliance placed upon the
information provided through this service and does not guarantee the
completeness or accuracy of the information.
The use of e-mail is not permitted for the distribution of chain letters or
offensive email of any nature.
Any recipient of an unacceptable communication, chain letter or offensive
material of any nature is requested to report this to petesan@foschini.co.za.
===============================================================================
|