Re: bypass subnets to manage another subnet

[Geoffrey Cheng <gcheng@CA.IBM.COM>]

Brian,

     make your seed file look like:

     ...
     !10.1.1.0-254
     10.1.5.0-254
     ...

     and restart your map regeneration, with "new node discovery" switched on.
     Then on your default submap, you will have at least two separated network
     icons,10.1.1 and 10.1.5. In 10.1.1, the only discovered node will be your
     NetView workstation, while in 10.1.5, resides the nodes you want to
discover.

Best Regards

Geoffrey Cheng
Sr. Network Management Specialist
SNMS/IBM Canada Ltd.
Tel: 905-316-5820 (IBM Office)
Tel: 416-304-4272 (CIBC-Intria)
e-mail: gcheng@ca.ibm.com



Brian Hwang <bhwang@TW.IBM.COM> on 06/05/99 12:29:45 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: Geoffrey Cheng/Markham/IBM)
Subject:  bypass subnets to manage another subnet





If netview's IP address is 10.1.1.1/255.255.255.0 , default gateway is
10.1.1.254.
Can I directly force netview to discover the subnet 10.1.5.0 with no
10.1.1.254 community?
the routing path are 10.1.1.1->10.1.1.254->10.1.2.254->10.1.5.254.
How to do it ?


Any help would be appreciated.
Thanks!

 Brian Hwang,
 IBM,Taiwan
 TEL:886-7-213-5523
 FAX:886-7-216-5488
 E-Mail: bhwang@tw.ibm.com