nv-l
[Top] [All Lists]

Re: NETVIEW SERVER IP ADDRESS CHANGE

To: nv-l@lists.tivoli.com
Subject: Re: NETVIEW SERVER IP ADDRESS CHANGE
From: Lucy Premus <lpremus@METLIFE.COM>
Date: Tue, 8 Jun 1999 14:45:51 -0400
Reply-to: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>
Sender: Discussion of IBM NetView and POLYCENTER Manager on NetView <NV-L@UCSBVM.UCSB.EDU>

James, attached is a response you gave back in March with respect to what needs
to be done when changing the IP address of your NetView server.  In particular I
am concerned with the effect is has on the Tivoli Framework and what needs to be
done to rectifiy that.

Actually our situation is a little different.  Yes the address of the NetView
server is changing, however it changes weekly.  I'll explain.  We have 2 NetView
servers (axscnv1 and axscnv2).  A primary and a secondary.  Every week we copy
the NetView databases from the primary to the secondary and as part of the
process (within a script) we've been running the reset_ci command to reconcile
the address difference.  However, we haven't really needed to use the Tivoli
desktop capabilities, until now.  We are trying to configure our secondary
NetView system to forward events to our TMR server (on another system).  It
doesn't seem to be working and I have a hunch its due to the change of address
problem.  The reason I'm saying this is that when you bring up the desktop on
our secondary NetView system the policy region name refers to our primary system
(ie. axscnv1).  It seems that everything else associated with this references
axscnv1 instead of axscnv2.  For example the /var/spool/Tivoli/?????.db file on
the secondary system has axscnv1.db instead of axscnv2.db.

I'm a true rookie when it comes to the Tivoli framework stuff, so hopefully what
I'm saying makes some sense to you.  Any ideas???
Anyone feel free to respond.   Thanks.................Lucy
---------------------- Forwarded by Lucy Premus/Bsg/MetLife/US on 06/08/99 02:33
PM ---------------------------
(Embedded image moved to file: pic03865.pcx)   Linda Parry
06/02/99 02:09 PM


To:   Lucy Premus/Bsg/MetLife/US@MetLife
cc:
Subject:  Re: NETVIEW SERVER IP ADDRESS CHANGE


---------------------- Forwarded by Linda Parry/Bsg/MetLife/US on 06/02/99 02:03
PM ---------------------------

 (Embedded
 image moved   James Shanks <James_Shanks @ TIVOLI.COM>
 to file:      03/17/99 01:41 PM
 pic18134.pcx)




Please respond to Discussion of IBM NetView and POLYCENTER Manager on NetView
      <NV-L@UCSBVM.ucsb.edu>

To:   NV-L @ UCSBVM.ucsb.edu
cc:    (bcc: Linda Parry/Bsg/MetLife/US)
Subject:  Re: NETVIEW SERVER IP ADDRESS CHANGE



/usr/OV/service/reset_ci is the answer, as several folks have noted, and it
is documented in the Diagnosis Guide.  It is a script so you can see what
it does.

But if  you are running NetView V5 or V5.1 then you will also have to
change the IP Address used by the oserv for the Framework, or you will not
have a a working Tivoli desktop (the thing you get when you type "tivoli").
If the only reason you installed the Framework was for NetView, and your
NetView box is also the TMR server and the only managed node in its domain,
then reset_ci will attempt to fix that for you, as well as the NetView
address.  But this doesn't always work.  If not, then you can try this
command as root:
     oserv -k $DBDIR -N ali
Note that since it uses $DBDIR you must have sourced the Tivoli environment
first
 (issue  .  /etc/Tivoli/setup_env.sh   and don't forget that leading "dot
space")

If your NetView server is not the TMR server or is part of a larger Tivoli
domain, then you should consult the Framework users guide about what to do,
and typically you must do this BEFORE you change the IP address that the
oserv depends on.

James Shanks
Tivoli (NetView for UNIX) L3 Support



"Ken Garst." <KGarst@GIANTOFMARYLAND.COM> on 03/17/99 12:25:33 PM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
      NetView <NV-L@UCSBVM.UCSB.EDU>

To:   NV-L@UCSBVM.UCSB.EDU
cc:    (bcc: James Shanks)
Subject:  Re: NETVIEW SERVER IP ADDRESS CHANGE





To change the IP address of the Netview server is easy.  On an AIX host,
just use smitty inet and enter the new ip address for the adapter.

However, you must tell Netview about this change by issuing the command
reset_ci, which in turn attaches the new ipaddr=hostname to the maps.  If
you are running the Netview client with local maps, you must change the
hostname associated with the local map back to the client's hostname by
issuing the command mapadmin -u <mapname>:<client_hostname> on either the
server or client.

Finally, all devices sending traps to Netview must have the  new ipaddress
entered as a trap destination into their snmpd.conf files and their snmpd
daemons refreshed.  This is nontrivial.  On Bay Networks switches, hubs and
routers, this means rebooting them and loss of communications until the
reboot takes effect.

Good luck!
kg

kgarst@giantofmaryland.com


Attachment: pic03865.pcx
Description: Binary data

Attachment: pic18134.pcx
Description: Binary data

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web