nv-l
[Top] [All Lists]

AW: NT machines with SNMP

To: nv-l@lists.tivoli.com
Subject: AW: NT machines with SNMP
From: Schiffinger Ralph 2100 <Ralph.Schiffinger@ERSTEBANK.AT>
Date: Mon, 15 Nov 1999 17:57:27 +0100
Zoltan, 

you might want to check out the agent configurations.

Can be a variety of things like e.g.
- wrong community string on your side (check ovsnmp.conf), or
- your NetView machine not being allowed to "snmp-access" the NT-machine, or
- SNMP-service not even running on the NT-box...

Compare the SNMP-setup of one box which is OK with one of the troublemakers.
Are the really identical?
What does snmpget from the command line tell you?

HTH, Ralph.
iT-AUSTRIA / OE2100 / WPNM
Tel  (mobil)  0664 1908469
Tel  (iT-A)    21717 58948
FAX (iT-A)    21717 58979
Mailto:Ralph.Schiffinger@erstebank.at


> -----Ursprüngliche Nachricht-----
> Von:  Nochta, Zoltan [SMTP:nochta@COOPERATION-MANAGEMENT.DE]
> Gesendet am:  Montag, 15. November 1999 17:02
> An:   NV-L@UCSBVM.ucsb.edu
> Betreff:      Re: NT machines with SNMP
> 
> Hi, 
> this ID is to define the vendor and the class of the object I think.
> Microsoft is present in this file and as I wrote, there are some PCs with
> full-infos (MIBs) to netview. I think it should be machine-dependent.
> 
> Any other ideas are welcome! 
> 
>                                 Zoltan 
>                    
> 
> > -----Original Message----- 
> > From: Boyles, Gary P [ <mailto:gary.p.boyles@INTEL.COM>] 
> > Sent: Monday, November 15, 1999 4:44 PM 
> > To: NV-L@UCSBVM.UCSB.EDU 
> > Subject: Re: NT machines with SNMP 
> > 
> > 
> > Zoltan, 
> > Make sure the sysObjectID for the PCs is known by NetView.  Do this by 
> > checking for the OID in your \usr\OV\conf\oid_to_typ and 
> > \usr\OV\conf\C\oid_to_sym. 
> > files. 
> > 
> > Garys 
> > 
> > -----Original Message----- 
> > From: Nochta, Zoltan [ <mailto:nochta@COOPERATION-MANAGEMENT.DE>] 
> > Sent: Monday, November 15, 1999 7:06 AM 
> > To: NV-L@UCSBVM.UCSB.EDU 
> > Subject: NT machines with SNMP 
> > 
> > 
> > 
> > 
> >                         Hi Forumers, 
> > 
> >         I'm running Netview on NT. 
> >         There are a lot of NT Workstations and servers 
> > running SNMP-Service 
> > in the network. 
> >         Some of them are manageble with Netview (I can read the MIB 
> > Variables), but more than 50% is only visible (as unknown PC) for our 
> > favourite networkmanagement-system. Has somebody any idea, how to 
> > prevent/repair it? 
> > 
> >         The SNMP-configuration of the PCs is the same. 
> > 
> >                         Thanks, Zoltan 
> > 
> 


<Prev in Thread] Current Thread [Next in Thread>
  • AW: NT machines with SNMP, Schiffinger Ralph 2100 <=

Archive operated by Skills 1st Ltd

See also: The NetView Web