Howto "Cut and Paste" thru ovw API

["MERY Olivier (Neuilly Gestion)" <olivier.mery@CETELEM.FR>]

Dear Netviewers,

The network I'm in charge of is rather complicated to display with the
standard way netview does.
So I intend to customize it with containers (Location), but our company is
composed of tens of offices and I can't afford spending time to customize it
by hand.
I'd prefer writing a procedure that reorganizes all the IP Internet submap
working with router and network names as input.

I had the idea to base this procedure on the wteuiap6 application developped
by ITSO guys, so I installed it. I did some testing to "emulate" the Cut and
Paste actions that have to be used thru the netview gui to do the job, but
it appears that wteuiap6 is not doing all that is done thru the gui (the
connection are not handled).

I was wondering if someone can explain step by step, how NetView does the
job so that I can have a look in the source of wteuiap6 and try to add
what's needed to make it work as I'd like to.

Thanks

Olivier



Tel.    : +33146399729
Fax     : +33146391554
Email   : <mailto:olivier.mery@cetelem.fr>

Olivier MERY
CETELEM
20, avenue Georges Pompidou
92595 LEVALLOIS-PERRET Cedex

Dear Netviewers,

The network I'm in charge of is rather complicated to display with the standard way netview does.
So I intend to customize it with containers (Location), but our company is composed of tens of offices and I can't afford spending time to customize it by hand.

I'd prefer writing a procedure that reorganizes all the IP Internet submap working with router and network names as input.

I had the idea to base this procedure on the wteuiap6 application developped by ITSO guys, so I installed it. I did some testing to "emulate" the Cut and Paste actions that have to be used thru the netview gui to do the job, but it appears that wteuiap6 is not doing all that is done thru the gui (the connection are not handled).

I was wondering if someone can explain step by step, how NetView does the job so that I can have a look in the source of wteuiap6 and try to add what's needed to make it work as I'd like to.

Thanks

Olivier

Tel.    : +33146399729
Fax     : +33146391554
Email   : <mailto:olivier.mery@cetelem.fr>

Olivier MERY
CETELEM
20, avenue Georges Pompidou
92595 LEVALLOIS-PERRET Cedex