You can do a trick and define a mib-expression to compute by example "11 -
ciscoEnvMonVoltageState" and define a threshold for the returned value. If the
value is greater than zero, ciscoEnvMonVoltageState is below 11 volt and you
may have problems.
Just a little trick, but I hope it helps.
Michael Seibold
>>> lclark@us.ibm.com 17.03.2000 14.55 Uhr >>>
Short answer, no. You cannot do logic in the display field. You can replace
the #* or whatever is in there that is giving you
ciscoEnvMonVoltageStatusDescr=+12.00
ciscoEnvMonVoltageStatusValue=11336
ciscoEnvMonVoltageState=2
with something like
Voltage event: Change: $1; Value: $2; State: $3
but you cannot evaluate the value '2' and have the event display 'Normal'
or whatever it means. That remains as a training issue. If there is a
different
trap sent for 'going bad' versus 'getting better', then you can change the
severity of the trap and give the operator a clue by the color of the event
in the events display. But the meaning of such state variables is different
from trap to trap and is not available programmatically. The only other
option would be to call a script, evaluate it yourself, and generate a
different trap or take another action.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
============================================================
Thanks to those provided input on loading cisco mibs and building traps,
even though my question was mostly lost in the debate regarding the netview
complier. I have worked through the compile problems and have used the
addtrap command, along with the addtrap scripts from cisco site, and am now
getting a simi proper trap.
I would like find out how to make the trap more descriptive.
I.E. I am receiving a voltage alarm from one of my routers, the trap comes
in as "trap received from enterprise cisco with 3 arguments: \
ciscoEnvMonVoltageStatusDescr=+12.00
ciscoEnvMonVoltageStatusValue=11336
ciscoEnvMonVoltageState=2
I can walk the MIB and identify that ciscoEnvMonVoltageState=2 means
warning. But is their a way to make the arguments correlate to the actual
meaning upon being received in the event window. So, instead of coming in
saying State=2, that the State is a warning or critical etc, and can this
be
done for other traps as well.
Thanks,
Jeff W.
Sr. Network Architect
Lockheed Martin
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
|