Thanks Leslie and James,
I have got it working but this has changed my understanding of if all.
This means that if you want you can have only one trap in your trapd for all
your requirements and just send through the variables you choose to define
your trap.
regards arthur
-----Original Message-----
From: James_Shanks@tivoli.com [mailto:James_Shanks@tivoli.com]
Sent: Friday, March 24, 2000 3:16 AM
To: IBM NetView Discussion
Subject: Re: [NV-L] snmptrap command (reformatted)
Leslie Clark wrote:
>> There is an outside chance that you might have trouble with the
specific
>> number you have chosen. It used to be documented (in V3) that
specific
>> trap ids 1000-1999 are reserved for your use. I don't know if that
means
>> it mishandles other numbers.
Nah. It just means that we pledge not to use this range ourselves.
snmptrap
doesn't care about what specific id you use. Theoretically, you should be
able
to use it to duplicate any valid trap. (It won't format invalid ones). To
solve some customer problems I have even gone so far as to (a) turn on the
hex
dump of all packets in trapd, (b) pull out a vendor trap from trapd.trace,
(c)
translate it by hand, and (d) use the translation to construct an snmptrap
command which would send a duplicate trap. It can do so, even down to the
time
stamp, if that is what you want.
James Shanks
Tivoli (NetView for UNIX and NT) L3 Support
_________________________________________________________________________
NV-L List information (unsubscribing, policies, posting, digest version,
searchable archives): http://www.tkg.com/nv-l
|