You can define your smartset using nvUtil command and nvdbformat command.
nvdbformat allow you to extract any data on the ovwdb database (such as TopM
Interface List). You can look for some example in /usr/OV/conf/nvdbtools. The
files you should look at are *.format.
nvUtil allow you to create a smartset.
Good luck.
Alexis Henry
Tivoli Engineer
Banque Nationale de Paris
ogobbi@sogei.it on 23/06/2000 18:15:50
Veuillez répondre à nv-l@tkg.com
Pour : NV-L@tkg.com
cc : (ccc : Alexis Henry/DOSI/BNP)
Objet : [NV-L] Defining smartsets by loopback ip-address
_____________________________________________________________________________________________________________________________________
Ce message et toutes les pièces jointes (ci-après le "message") sont établis à
l'intention exclusive de ses destinataires et sont confidentiels. Si vous
recevez ce message par erreur, merci de le détruire et d'en avertir
immédiatement l'expéditeur.
Toute utilisation de ce message non conforme à sa destination, toute diffusion
ou toute publication, totale ou partielle, est interdite, sauf autorisation
expresse.
L'internet ne permettant pas d'assurer l'intégrité de ce message, BNP PARIBAS
(et ses filiales) décline(nt) toute responsabilité au titre de ce message, dans
l'hypothèse où il aurait été modifié.
----------------------------------------------------------------------------------
This message and any attachments (the "message") are intended solely for the
addressees and are confidential. If you receive this message in error, please
delete it and immediately notify the sender.
Any use not in accord with its purpose, any dissemination or disclosure, either
whole or partial, is prohibited except formal approval.
The internet can not guarantee the integrity of this message. BNP PARIBAS (and
its subsidiaries) shall (will) not therefore be liable for the message if
modified.
_____________________________________________________________________________________________________________________________________
I need to define smartsets for my Cisco routers (about 600), using their
loopback ip-address as rule of filtering.
I find out that the loopback interface is in the object information as TopM
Interface List, but this field is not available in the rules of the smartsets.
If I set the IP Address equal the loopback address, in the smartset rule, i get
only the loopback interfaces, and is not good for me.
Now I can't use any other filtering criteria for the smartsets I need.
I work with Tivoli Netview V 6. installaed on Aix 4.3.
Anyone got any ideas ?
Orlando GOBBI
System & Network Management
Sogei - STS/RST
ogobbi@sogei.it
Tel. 06-50252228
Mobile 0335-5300739
|
I need to define smartsets for my Cisco routers (about 600),
using their loopback ip-address as rule of filtering.
I find out that the loopback interface is in the object
information as TopM Interface List, but this field is not available in the rules
of the smartsets.
If I set the IP Address equal the loopback address, in the
smartset rule, i get only the loopback interfaces, and is not good for me.
Now I can't use any other filtering criteria for the smartsets
I need.
I work with Tivoli Netview V 6. installaed on Aix
4.3.
Anyone got any ideas ?
Orlando GOBBI
System & Network Management
Sogei -
STS/RST
ogobbi@sogei.it
Tel.
06-50252228
Mobile 0335-5300739
|
|