Hi,
I'm starting the netview update installation, but I got the following
message:
Distributing architecture specific NetView Features Configuration for
svnetview.telesc
............................................................................
.......
Something went wrong:
Media Packet: "/cdrom/netview6unix/FILE43.PKT"
svnetview.telesc:FAILED (soft error)
Failure: the last few lines of the error log
(/tmp/NVS_60_NVFCONF_after.error):
Base operation complete...
+ echo NetView Installation encountered errors and has not successfully
completed.
NetView Installation encountered errors and has not successfully completed.
+ echo Please check the log file /tmp/update.log for more details about the
errors.
Please check the log file /tmp/update.log for more details about the errors.
+ echo Then run TOOLS/cleanup script on the NetView cdrom to deinstall
NetView,
Then run TOOLS/cleanup script on the NetView cdrom to deinstall NetView,
+ echo fix the errors and reinstall again.
fix the errors and reinstall again.
+ exit 1
completed with errors.
Registering product installation attributes...registered.
Finished product installation with errors.
I'm look at for erros in /tmp/NVS_60_BIN_before.output, but there isn't any
, it's seems prerequisites are met.
It seems that the installation fails after prerequisites checking.
There are some errors in another two installation files update.log and
NVS_60_NVFCONF.error.
update.log
#########################
* Running customize script for fileset OVWIN.
NOTE: Configuring ovwdb
NOTE: Configuring nvsecd
NOTE: Starting nvsecd
NOTE: Starting ovwdb
object manager name: ovwdb
behavior: OVs_WELL_BEHAVED
state: NOT_RUNNING
PID: 7979
last message:
exit status: exited on signal 9
ERROR: Unable to start ovwdb with ovstart.
ERROR: Unable to start ovwdb with ovstart.
ERR_0003_050
ERR_0003_050
+ dspmsg -s 5 nv6000.cat 9999 customize: Failing customize with exit code
%s\
n 2
+ 1>> /tmp/update.log
customize: Failing customize with exit code 2
ERROR: Customize script for fileset OVWIN exited with code 2.
ERR_cfgbf_001
nvconfigbf: Failing doing configuration with exit code 2
base: Failure running script or command
'/usr/OV/install/tools/nvconfigbf'
ERR_bcfg_210
base: Failing base.config with exit code 2
###########################
NVS_60_NVFCONF.error.
############################
Updating /usr/OV/security/C/Domains/registration/ovw
Migrating reports...
Migrating MIBs...
Starting tracing and logging
Running customize script for fileset OVMIN-LICENSE.
Making links....
Running customize script for fileset OVMIN.
Making links....
Running customize script for fileset OVWIN.
ERROR: Customize script for fileset OVWIN exited with code 2.
ERR_cfgbf_001
+ dspmsg -s 5 nv6000.cat 9999 nvconfigbf: Failing doing configuration
with ex
it code %s\n 2
+ 1>> /tmp/update.log
ERR_bcfg_210
+ dspmsg -s 5 nv6000.cat 9999 base: Failing base.config with exit code
%s\n 2
+ 1>> /tmp/update.log
base: Saving log files to /tmp/NVfail.tar
funct_return=1
+ [ 1 = 0 ]
+ [ = ]
+ echo running nv6000.base.obj.unconfig
running nv6000.base.obj.unconfig
+ ./nv6000.base.obj.unconfig
==== base unconfig Wed Aug 23 11:31:36 EST 2000 ====
Stopping daemons...
Killing netfmt (305)...
Removing error log messages...
Deleting added lines in rc.tcpip
Removing installp features ODM entries...
Base operation complete...
+ echo NetView Installation encountered errors and has not successfully
complete
d.
NetView Installation encountered errors and has not successfully completed.
+ echo Please check the log file /tmp/update.log for more details about the
erro
rs.
Please check the log file /tmp/update.log for more details about the errors.
+ echo Then run TOOLS/cleanup script on the NetView cdrom to deinstall
NetView,
Then run TOOLS/cleanup script on the NetView cdrom to deinstall NetView,
+ echo fix the errors and reinstall again.
fix the errors and reinstall again.
+ exit 1
Does anyone can I help me ?
Antunes
|