RE: Smartset SNMP System Properties NV 6 for NT

["Boyles, Gary P" <gary.p.boyles@intel.com>]

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

Darrell,
To make sure that the node you are trying this on actually supports that
field....
 
ovobjprint -s theNode
 
Regards,
 
Gary Boyles

-----Original Message-----
From: Darrell Singleton [mailto:darrell.singleton@worldnet.att.net]
Sent: Monday, February 05, 2001 4:13 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] Smartset SNMP System Properties NV 6 for NT


Gary,
 
Thanks for the reply. I tried that before I posted and got an invalid
OVwfield error. I will try tomorrow again and let you know what happens. I
could have had a finger stick in it but I believe the field name is sysName.
 
Thanks a bunch for your help.
 
Darrell
 
----- Original Message ----- 

From: Boyles, Gary P <mailto:gary.p.boyles@intel.com>  
To: 'IBM NetView Discussion' <mailto:nv-l@tkg.com>  
Sent: Monday, February 05, 2001 5:48 PM
Subject: RE: [NV-L] Smartset SNMP System Properties NV 6 for NT

Darrell,
Of course, this is only good for routers (I guess).
 
Anyway... if you want to add a text-field (any text-field) that isn't listed
in the GUI... just
select some other field (e.g. sysDescription), and do the "Add To Advanced".
In the
window that displays the actual rule-code simply edit the field (e.g.
sysDescription), and
add your own field (e.g. sysName).  Just make sure you have the actual
field-names
correctly spelled (including up/lower case).
 
Regards,
 
Gary Boyles, Intel

-----Original Message-----
From: Darrell Singleton [mailto:darrell.singleton@worldnet.att.net]
Sent: Monday, February 05, 2001 8:29 AM
To: nv-l@tkg.com
Subject: [NV-L] Smartset SNMP System Properties NV 6 for NT


Sirs;
 
Netview 6 NT
 
When creating smartsets, there is no sysName snmp field available on the
menu "SNMP System Properties". All choices that exist are:
Object ID, Location, Description and Contact.
 
How can I add sysName to that menu?
 
Thanks

Darrell,

To make sure that the node you are trying this on actually supports that field....

 

ovobjprint -s theNode

 

Regards,

 

Gary Boyles

-----Original Message-----
From: Darrell Singleton [mailto:darrell.singleton@worldnet.att.net]
Sent: Monday, February 05, 2001 4:13 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] Smartset SNMP System Properties NV 6 for NT

Gary,

 

Thanks for the reply. I tried that before I posted and got an invalid OVwfield error. I will try tomorrow again and let you know what happens. I could have had a finger stick in it but I believe the field name is sysName.

 

Thanks a bunch for your help.

 

Darrell

 

----- Original Message -----

From: Boyles, Gary P

To: 'IBM NetView Discussion'

Sent: Monday, February 05, 2001 5:48 PM

Subject: RE: [NV-L] Smartset SNMP System Properties NV 6 for NT

Darrell,

Of course, this is only good for routers (I guess).

 

Anyway... if you want to add a text-field (any text-field) that isn't listed in the GUI... just

select some other field (e.g. sysDescription), and do the "Add To Advanced".  In the

window that displays the actual rule-code simply edit the field (e.g. sysDescription), and

add your own field (e.g. sysName).  Just make sure you have the actual field-names

correctly spelled (including up/lower case).

 

Regards,

 

Gary Boyles, Intel

-----Original Message-----
From: Darrell Singleton [mailto:darrell.singleton@worldnet.att.net]
Sent: Monday, February 05, 2001 8:29 AM
To: nv-l@tkg.com
Subject: [NV-L] Smartset SNMP System Properties NV 6 for NT

Sirs;

 

Netview 6 NT

 

When creating smartsets, there is no sysName snmp field available on the menu "SNMP System Properties". All choices that exist are:

Object ID, Location, Description and Contact.

 

How can I add sysName to that menu?

 

Thanks