hi!
i just found the trap under:
http://www.ciscosystems.co.nz/warp/public/477/SNMP/snmp_traps.html
------------------------------------------------------------------
isdn--Sends Integrated Services Digital Network (ISDN) notifications.
When the isdn keyword is used, you can specify a notification-option value.
This is from the CISCO-ISDN-MIB-V1SMI.my and the notifications are:
enterprise 1.3.6.1.4.1.9.9.26.2
1 demandNbrCallInformation
2 demandNbrCallDetails
3 demandNbrLayer2Change [supported since Cisco IOS Software version 12.1(1)T
]
4 demandNbrCNANotification [supported since Cisco IOS Software version
12.1(5)T ]
------------------------------------------------------------------
but there seams to be no information on the actual variables
send with the trap
mfG. Alfred Reibenschuh
INFORMATIONSTECHNOLOGIE AUSTRIA GMBH
TELEKOMMUNIKATION
Networkmanagement
A-1020 Wien, Lassallestrasse 5
T: ++43-1-21717-58947
F: ++43-1-21717-58979
E: alfred.reibenschuh@it-austria.com
-------------------------------------------
Welcome to the Karma Hotel
Looks like Heaven but could be Hell
Where pleasant screams transform to yells
And every suite casts its own spell
> -----Original Message-----
> From: William.Stringfellow@BANKOFAMERICA.COM
> [mailto:William.Stringfellow@BANKOFAMERICA.COM]
> Sent: Friday, June 15, 2001 7:33 PM
> To: IBM NetView Discussion
> Subject: [NV-L] RE: unidentified cisco ISDN trap & Netview
> with AIX 5.1
>
>
>
>
>
>
>
> Hello Everyone,
> I believe Francois's problem isn't finding the MIB, it is
> that there is
> no definition in the ISDN MIB for a specific 3 trap.
>
> Francois, you may want to contact Cisco and see what
> enhancement they
> have incorporated that their router is trying to tell you
> about, and than
> manually construct the trap definition in xnmtrap.
>
> Regards.
> Bill
>
>
>
>
> ==============================================================
> ===========
> Date: Thu, 14 Jun 2001 15:53:55 -0400
> From: "Francois Le Hir/Quebec/IBM" <flehir@ca.ibm.com>
> Subject: unidentified cisco ISDN trap & Netview with AIX 5.1
>
>
> Hello all,
>
> I am receiving traps from a Cisco ISDN router that I don't manage to
> identify ...
> 1.3.6.1.4.1.9.9.26.2 generic 6 specific 3 arg 1 = 5
> arg 2 = 3
> I have the specifics 1 and 2 already defined in my trapd.conf
> but can not
> find the specific 3.
> I have been searching in http://www.cisco.com/public/mibs/
> in the latest
> mibs but without success...
>
> does someone has information on that ?
>
> Also, on an other subject, does anybody know if Netview 6 is supported
> under AIX 5.1 ?
>
> Thanks,
> Regards,
>
> Francois Le Hir
> Network Projects & Consulting Services
> IBM Global Services
> Phone: (514) 205 6695
>
>
>
> ______________________________________________________________
> ___________
|