To configure which port will be monitored for SNMP traps DFM receives from
other NMSs:
----------------------------------------------------------------------------
----
Step 1 Make sure the devices and/or NMS that are forwarding traps to DFM
are configured to send them to the port defined in the adapter configuration
file.
If another NMS is already listening for traps on the standard UDP trap port
(162), you must configure this adapter to use another port, such as port
9000.
Step 2 Select Device Fault Manager>Administration>Trap Configuration>Trap
Receiving.
Step 3 In the Listening Port field, enter the port number of the local
host where the DFM server is running.
Step 4 Click OK.
Best Regards,
Frank W. Hansen
Tivoli Certified Enterprise Consultant
www.EnterpriseInnovations.com
----- Original Message -----
From: "kaveh taghi-zadeh" <kaveh_t@hotmail.com>
To: <nv-l@tkg.com>
Sent: Tuesday, August 21, 2001 12:21 PM
Subject: Re: [NV-L] NV & CiscoWorks2000
> Hi Frank,
>
> Device Fault Manager is installed.
> Which ports does it use?
> Could you tell me where to change the
> port settings?
> Thanks a lot.
> Kaveh.
>
>
> ----Original Message Follows----
> From: "Frank W. Hansen" <fhansen@enterpriseinnovations.com>
> Reply-To: IBM NetView Discussion <nv-l@tkg.com>
> To: "IBM NetView Discussion" <nv-l@tkg.com>
> Subject: Re: [NV-L] NV & CiscoWorks2000
> Date: Tue, 21 Aug 2001 06:56:57 -0500
> MIME-Version: 1.0
> Received: from [198.3.130.68] by hotmail.com (3.2) with ESMTP id
> MHotMailBD4B9AF40076400438DAC6038244C8A30; Tue, 21 Aug 2001 05:11:35 -0700
> Received: from localhost (daemon@localhost)by westlake.tkg.com
(8.9.3/8.9.3)
> with SMTP id HAA50800;Tue, 21 Aug 2001 07:07:53 -0500
> Received: by westlake.tkg.com (bulk_mailer v1.12); Tue, 21 Aug 2001
07:07:52
> -0500
> Received: (from mjrdomo@localhost)by westlake.tkg.com (8.9.3/8.9.3) id
> HAA63960for nv-l-outgoing; Tue, 21 Aug 2001 07:07:51 -0500
> From owner-nv-l@tkg.com Tue, 21 Aug 2001 05:12:43 -0700
> Message-ID: <007901c12a38$62147e90$dd00800a@darthmaul>
> References: <F14XvpFVjCRGryWtIIZ0000fbf5@hotmail.com>
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook Express 5.50.4522.1200
> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200
> Sender: owner-nv-l@tkg.com
> Precedence: bulk
>
> Kaveh,
>
> if your using DFM within CiscoWorks yes...you will have to adjust this
port.
>
>
> Best Regards,
>
> Frank W. Hansen
> Tivoli Certified Enterprise Consultant
> www.EnterpriseInnovations.com
>
>
> ----- Original Message -----
> From: "kaveh taghi-zadeh" <kaveh_t@hotmail.com>
> To: <nv-l@tkg.com>
> Sent: Tuesday, August 21, 2001 11:53 AM
> Subject: [NV-L] NV & CiscoWorks2000
>
>
> > Hi all,
> >
> > can NV and CiscoWorks2000 (CW2K) be installed on
> > the same machine without any extra
> > customizings needed?
> >
> >
> > Won't CW2K use the same ports (e.g.161) as NV
> > and thus cause problems?
> >
> > Thanks,
> > Kaveh.
> >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
> http://explorer.msn.com/intl.asp
> >
> >
_________________________________________________________________________
> > NV-L List information and Archives: http://www.tkg.com/nv-l
>
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>
> _________________________________________________________________________
|