This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Two thoughts:
1. If you are using pings for status polls, the addresses on the serial
links may not be "routed" address (i.e. Netview can't ping them)
2. If you are using SNMP status polls (use the $router_name in seed_file) it
will use the SNMP oper status fields to set the interfaces as "up"
-----Original Message-----
From: Rick Yetter II [mailto:ryetter_ii@hotmail.com]
Sent: Monday, August 27, 2001 11:52 AM
To: nv-l@tkg.com
Subject: [NV-L] Serial Link Status is down
I am monitoring a network with all Bay Networks gear, the autodiscovery has
been completed and in the submaps on the routers it shows all serial links
as down. I'm using Netview 6.02 on AIX 4.3.3, has anyone ran into this sort
of problem before?
|
Two
thoughts:
1. If
you are using pings for status polls, the addresses on the serial links may not
be "routed" address (i.e. Netview can't ping them)
2. If
you are using SNMP status polls (use the $router_name in seed_file) it will use
the SNMP oper status fields to set the interfaces as "up"
I am monitoring a network with all Bay Networks
gear, the autodiscovery has been completed and in the submaps on the routers
it shows all serial links as down. I'm using Netview 6.02 on AIX 4.3.3,
has anyone ran into this sort of problem
before?
|
|