Helmut,
what kind of sniffer do you use?
What I see is only the summary of the packages.
The community must be in the package.
I think you should contact support.
This looks to be a tricky one ;-)
Kind regards
Oliver Bruchhaeuser
Tivoli NetView EMEA L2 Support
IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
55131 Mainz - Germany
Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
bruchhae@de.ibm.com
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
helmut.schroeder.hs@b
ayer-ag.de To: IBM NetView Discussion
<nv-l@tkg.com>
Sent by: cc:
owner-nv-l@tkg.com Subject: Antwort: Re:
[NV-L] demandpoll fails
09.11.2001 15:03
Please respond to IBM
NetView Discussion
Hi Oliver ,
no community string means:
1:) demandpoll:
14:57:20.237981829 10.10.10.10.53151 > 20.20.20.20.161: GetRequest(27)
.1.3.6.1.2.1.1.2.0
(3 times)
<no response>
2) snmpget 20.20.20.20 1.3.6.1.2.1.1.2.0:
14:58:17.556524142 10.10.10.10.50548 > 20.20.20.20.161: C=community
GetRequest(26) .1.3.6.1.2.1.1.2.0
14:58:17.562212771 20.20.20.20.161 > 10.10.10.10.50548: C=community
GetResponse(35) .1.3.6.1.2.1.1.2.0=.1.3.6.1.4.1.9.1.168
No smartsets were used in the SNMP configuration ...
Regards - Helmut
"Oliver Bruchhaeuser" <oliver.bruchhaeuser@de.ibm.com>@tkg.com on
09.11.2001
14:48:58
Bitte antworten an IBM NetView Discussion <nv-l@tkg.com>
Gesendet von: owner-nv-l@tkg.com
An: IBM NetView Discussion <nv-l@tkg.com>
Kopie:
Blindkopie:
Thema: Re: [NV-L] demandpoll fails
Helmut,
what do you mean with "no community string"?
Is the Node contained in a Smartset used in SNMP configuration ?
Kind regards
Oliver Bruchhaeuser
Tivoli NetView EMEA L2 Support
IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
55131 Mainz - Germany
Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
bruchhae@de.ibm.com
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
helmut.schroeder.hs@b
ayer-ag.de To: IBM NetView
Discussion
<nv-l@tkg.com>
Sent by: cc:
owner-nv-l@tkg.com Subject: [NV-L]
demandpoll
fails
09.11.2001 12:50
Please respond to IBM
NetView Discussion
Hi all,
on NetView 6.0.2 / AIX 4.3.3:
Node is partially discovered (via nodename in seedfile), but with no
interfaces
demandpoll fails with timeout but snmpwalk works fine:
tcpdump shows that both requests go to the same ip address
(name resolution is ok in both ways), the problem is that
snmpwalk sends the correct community and the demandpoll
sends no community string !? I thought they would use both the
same source to determine which community to use ?!
( xnmsnmpconf -resolv shows the correct community for ip address
and hostname ... cache was cleared)
Any ideas ? Thanks - Helmut
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|