Hi list,
I,ve got a problem with loading MIBS, I think. My problem is:
I need monitoring the digital and analogic calls in a Cisco AS5300, the MIB
wasn`t loaded in Netview, I found it (CISCO-POP-MGMT-MIB-V1SMI[1].my) and
loaded it.
Now, I can ask for the 1.3.6.1.4.1.9.10.19.1.1.9.1.3.0 with the Mib Browser
in Tools option using the SNMPv1/SNMPv2. The data I collect is 1 digital
call and 12 analogic calls.
I`ve tried to use the Data Collection & Thresholds:SNMP aplication in Tools
option, for collecting values in this MIB, and generate events when calls
are up to 20.
These are the steps I made:
* open the Data Collection & Thresholds:SNMP... aplication in Tools
option
* Press the Add button in "Mibs Objects Configured for Collection"
* And put the mib oid (1.3.6.1.4.1.9.10.19.1.1.9.1.3.0 ) in the Mib
Object ID textArea
* Press the Apply
* Select the node, polling interval, instances and press OK
* Press apply button
The Data Collection should collect information and generate events, but it
doesn`t. The snmpCollect daemon stops with the following
exit status: exit (1)
last message: Error reading configuration file /usr/OV/conf/snmpCol.conf :No
such expresion "1.3.6.1.4.1.9.10.19.1.1.9.1.3.0" at
/usr/OV/conf/snmpCol.conf:44
My question is, why are we able to ask about the mib using the mib browser
and not with the Data Collection?
Any suggestions?
|