-- ********************************************************************** -- * awcVx Management Information Base -- ********************************************************************** -- References herein to Unsigned32 should be UInteger32 for most MIB compilers AWCVX-MIB DEFINITIONS ::= BEGIN IMPORTS NetworkAddress, enterprises FROM RFC1155-SMI MODULE-IDENTITY, OBJECT-TYPE, Integer32, UInteger32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, RowStatus, MacAddress, TruthValue FROM SNMPv2-TC TRAP-TYPE FROM RFC-1215 ifIndex FROM RFC1213-MIB; -- ********************************************************************** -- * MODULE IDENTITY -- ********************************************************************** -- awcVx MODULE-IDENTITY -- LAST-UPDATED "9906290000Z" -- ORGANIZATION "Aironet Wireless Communications, Inc." -- CONTACT-INFO "Victor Griswold" -- DESCRIPTION -- "The MIB module for Aironet entities. -- iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).aironet(522).awcVx(3)" -- ::= { enterprises 522 3 } aironet OBJECT IDENTIFIER ::= { enterprises 522 } awcVx OBJECT IDENTIFIER ::= { aironet 3 } -- ********************************************************************** -- * Major sections -- ********************************************************************** -- Aironet Wireless Communications System (awcSystem) Attributes -- DEFINED AS "The awcSystem object class provides all standard -- information to support operation of an Aironet Access Point such -- as versions, system flags, and what features are enabled."; awcSystem OBJECT IDENTIFIER ::= {awcVx 1} -- bootconfig VxWorks (bootconfigVx) Attributes -- DEFINED AS "The bootconfigVx object class provides all standard -- information to support operation of the boot server."; bootconfigVx OBJECT IDENTIFIER ::= {awcVx 2} -- Aironet Wireless Communication Serial Device (awcSerialDev) Attributes -- DEFINED AS "The awcSerialDev object class provides all standard -- information to support configuration of serial ports."; awcSerialDev OBJECT IDENTIFIER ::= {awcVx 3} -- Aironet Wireless Communication FTP (awcFtp) Attributes -- DEFINED AS "The awcFTP object class provides all standard -- information to support configuration of the FTP protocol."; awcFtp OBJECT IDENTIFIER ::= {awcVx 4} -- Aironet Wireless Communication 802.11 (awc802dot11) Attributes -- DEFINED AS "The awc802dot11 object class provides all standard -- information to support configuration of the 802.11 protocol."; awc802dot11 OBJECT IDENTIFIER ::= {awcVx 6} -- Aironet Wireless Communication UserManager (awcUserMgr) Attributes -- DEFINED AS "The awcUserMgr object class provides all standard -- information to support configuration of the User Manager."; awcUserMgr OBJECT IDENTIFIER ::= {awcVx 7} -- Aironet Wireless Communication HTTPd (awcHttpd) Attributes -- DEFINED AS "The awcHttpd object class provides all standard -- information to support configuration of the Web Server."; awcHttpd OBJECT IDENTIFIER ::= {awcVx 8} -- Aironet Wireless Communication DNS Resolver (awcDnsRes) Attributes -- DEFINED AS "The awcDnsRes object class provides all standard -- information to support configuration of the DNS Resolver."; awcDnsRes OBJECT IDENTIFIER ::= {awcVx 9} -- Aironet Wireless Communication SNMP (awcSnmp) Attributes -- DEFINED AS "The awcSnmp object class provides all standard -- information to support configuration of the SNMP protocol."; awcSnmp OBJECT IDENTIFIER ::= {awcVx 10} -- Aironet Wireless Communication SNTP (awcSntp) Attributes -- DEFINED AS "The awcSntp object class provides all standard -- information to support configuration of the SNTP protocol."; awcSntp OBJECT IDENTIFIER ::= {awcVx 11} -- Aironet Wireless Communication Forwarding Table (awcForwardTbl) Attributes -- DEFINED AS "The awcForwardTbl object class provides all standard -- information to support configuration of the Forwarding Table."; awcForwardTbl OBJECT IDENTIFIER ::= {awcVx 12} -- Aironet Wireless Communication RIP (awcRipConfig) Attributes -- DEFINED AS "The awcRipConfig object class provides all standard -- information to support configuration of the Forwarding Table."; awcRipConfig OBJECT IDENTIFIER ::= {awcVx 13} -- Aironet Wireless Communications Event Log (awcEventLog) Attributes -- DEFINED AS "The awcEventLog object class provides all standard -- information to support operation of the Event Log."; awcEventLog OBJECT IDENTIFIER ::= {awcVx 14} -- Aironet Wireless Communications Ethernet Controller (awcEtherMIB) Attributes -- DEFINED AS "The awcEtherMIB object class provides all standard -- information to support operation of the Ethernet Controller."; awcEtherMIB OBJECT IDENTIFIER ::= {awcVx 15} -- Aironet Wireless Communications DDP/IAPP (awcDdpIAPP) Attributes -- DEFINED AS "The awcDdpIAPP object class provides all standard -- information to support operation of the DDP and IAPP protocols."; awcDdpIAPP OBJECT IDENTIFIER ::= {awcVx 17} -- Aironet Wireless Communications Hot Standby (awcHotStandby) Attributes -- DEFINED AS "The awcHotStandby object class provides all standard -- information to support operation of an AP in the Hot Standby mode."; awcHotStandby OBJECT IDENTIFIER ::= {awcVx 18} -- Aironet Wireless Communications Authentication, Authorization, and -- Accounting (awcAaa) Attributes . -- DEFINED AS "The awcAaa object class provides all standard -- information to support configuration of RADIUS and TACACS+ -- client operation."; awcAaa OBJECT IDENTIFIER ::= {awcVx 19} -- Aironet Wireless Communications Protocol Filters (awcProtocolFilters) Attributes -- DEFINED AS "The awcProtocolFilters object class provides all standard -- information to support configuration of static protocol filters on the AP."; awcProtocolFilters OBJECT IDENTIFIER ::= {awcVx 20} -- Aironet Wireless Communication Experimnetal (awcExperimental) Attributes -- DEFINED AS "The awcExperimental object class provides all standard -- information to support experimental functions."; -- awcExperimental OBJECT IDENTIFIER ::= {awcVx 99} -- ********************************************************************** -- * MIB attribute OBJECT-TYPE definitions follow -- ********************************************************************** WEPKeytype128 ::= OCTET STRING (SIZE (5..13)) -- ********************************************************************** -- * awcSystem parameters -- ********************************************************************** vxWorksVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the underlying VxWorks operating system." ::= { awcSystem 1 } creationDate OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The date the code was initially compiled." ::= { awcSystem 2 } awcVxVersion OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the Access Point system code." ::= { awcSystem 3 } sysFlags OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The flag settings of the system software." ::= { awcSystem 4 } languageCode OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The language currently in use by the system. Max. string length is 128 octets." ::= { awcSystem 5 } awcDevID OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-only STATUS current DESCRIPTION "The device ID of the system." ::= { awcSystem 6 } awcDevIDtxt OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The text entry for the device id. Max. string length is 128 octets." ::= { awcSystem 7 } enableHTTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether HTTP is enabled or not." ::= { awcSystem 8 } enableTelnet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether TELNET is enabled or not." ::= { awcSystem 9 } enableSNMP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether SNMP is enabled or not." ::= { awcSystem 10 } enableDnsResolver OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether DNS Resolver is enabled or not." ::= { awcSystem 11 } -- enableProxyARP OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Boolean on whether proxy ARP is enabled or not." -- ::= { awcSystem 12 } enableSNTP OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether SNTP is enabled or not." ::= { awcSystem 13 } enableWDB OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether WDB is enabled or not." ::= { awcSystem 14 } pingTxLen OBJECT-TYPE SYNTAX UInteger32 (12..4096) MAX-ACCESS read-create STATUS current DESCRIPTION "Integer value holding size of ping packet. Default 64." ::= { awcSystem 15 } awcFirstBoot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Boolean on whether first time booting or not." ::= { awcSystem 16 } awcOemOUI OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IEEE Organizationally Unique Identifier of the reseller for which this system is branded." ::= { awcSystem 17 } awcOemName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The full name of the reseller for which this system is branded." ::= { awcSystem 18 } awcOemNameShort OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "An abbreviated name of the reseller for which this system is branded." ::= { awcSystem 19 } awcOemHomeURL OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "The URL of the corporate HTML home page of the reseller for which this system is branded." ::= { awcSystem 20 } enablePSPF OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used." ::= { awcSystem 21 } sysExceptionReboot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system." ::= { awcSystem 24 } -- ********************************************************************** -- * End of awcSystem parameters -- ********************************************************************** -- ********************************************************************** -- * bootconfigVx parameters -- ********************************************************************** bootconfigBootProtocol OBJECT-TYPE SYNTAX INTEGER {none(1), bootp(2), dhcp(3)} MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol to be used for boot configuration (BOOTP, DHCP, or none)." ::= { bootconfigVx 1 } bootconfigReadINI OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, the system will attempt to read a .ini file from the designated defaultFileServer, then, if not successful, from the BOOTP- or DHCP-designated file server. The name of this file will be based first on the BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the IP address, then the BOOTP- or DHCP-assigned boot file name." ::= { bootconfigVx 2 } bootconfigServerConfigTimeout OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The time in seconds which the system should wait for a configuration response from a DHCP or BOOTP server before falling back to the stored configuration." ::= { bootconfigVx 3 } bootconfigMultOfferTimeout OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer." ::= { bootconfigVx 4 } bootconfigReqLeaseDuration OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The requested DHCP lease duration, in minutes." ::= { bootconfigVx 5 } bootconfigMinLeaseDuration OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum acceptable DHCP lease duration, in minutes." ::= { bootconfigVx 6 } bootconfigDev OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress." ::= { bootconfigVx 7 } bootconfigClientAddr OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 8 } bootconfigHostAddr OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the BOOTP or DHCP server which responded to the configuration request from this device." ::= { bootconfigVx 9 } bootconfigBootFile OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device." ::= { bootconfigVx 10 } bootconfigSubnetMask OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 11 } bootconfigGateway OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 12 } bootconfigHostName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual name of the BOOTP or DHCP server which responded to the configuration request from this device. This should be a DNS-recognizable host name." ::= { bootconfigVx 13 } bootconfigClientName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name." ::= { bootconfigVx 14 } bootconfigNameServerTable OBJECT-TYPE SYNTAX SEQUENCE OF BootconfigNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server." ::= { bootconfigVx 15 } bootconfigNameServerEntry OBJECT-TYPE SYNTAX BootconfigNameServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in bootconfigNameServerTable." INDEX {bootconfigNameServerPriority} ::= { bootconfigNameServerTable 1 } BootconfigNameServerEntry ::= SEQUENCE { bootconfigNameServerPriority INTEGER, bootconfigNameServer NetworkAddress} bootconfigNameServerPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The priority order in which a domain name server is queried." ::= { bootconfigNameServerEntry 1 } bootconfigNameServer OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP Address of a domain name server." ::= { bootconfigNameServerEntry 2 } bootconfigDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol." ::= { bootconfigVx 16 } bootconfigSntpServer OBJECT-TYPE SYNTAX NetworkAddress MAX-ACCESS read-only STATUS current DESCRIPTION "IPv4 network address of SNTP server for use by this device." ::= { bootconfigVx 17 } bootconfigSaveServerResponse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If true, a response from the boot server should is saved as the new system defaults." ::= { bootconfigVx 18 } -- bootconfigCmdInvokeIniLoad OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Initiate loading of an initialization script '.ini' file -- from the file server into the system FLASH." -- ::= { bootconfigVx 19 } -- bootconfigCmdStatusIniLoad OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the most recent command to load an initialization script -- '.ini' file. Possible values: -- 0 = Operation completed successfully (or has not taken place). -- 2 = The '.ini' file was not found on the file server. -- 12 = Insufficient memory to load the '.ini' file. -- 22 = Invalid '.ini' file format. -- 35 = File format of the '.ini' file is not supported. -- 68 = Operation is still in progress. Poll again later. -- 72 = Operation was started, but later was canceled." -- ::= { bootconfigVx 20 } -- bootconfigCmdInvokeIniSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Initiate saving of an initialization script '.ini' file -- to the file server from the system FLASH." -- ::= { bootconfigVx 21 } -- bootconfigCmdStatusIniSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the most recent command to save the initialization -- script '.ini' file. Possible values: -- 0 = Operation completed successfully (or has not taken place). -- 1 = Insufficient permission to save the file. -- 2 = The '.ini' file was not found on the file server. -- 22 = Invalid '.ini' file format. -- 68 = Operation is still in progress. Poll again later. -- 72 = Operation was started, but later was canceled." -- ::= { bootconfigVx 22 } -- bootconfigDetailLevelIniSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Level of detail and line formatting for the initialization script -- '.ini' file to be saved." -- ::= { bootconfigVx 23 } bootconfigDhcpClassID OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases." ::= { bootconfigVx 24 } -- ********************************************************************** -- * End of bootconfigVx parameters -- ********************************************************************** -- ********************************************************************** -- * awcSerialDev parameters -- ********************************************************************** awcSerialConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF TypeawcSerialConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "SerialConfigTable attributes. In tablular form to allow for multiple instances on an agent." ::= { awcSerialDev 1 } awcSerialConfigEntry OBJECT-TYPE SYNTAX TypeawcSerialConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the awcSerialConfigEntry table." INDEX {serialDevIndex} ::= { awcSerialConfigTable 1 } TypeawcSerialConfigEntry ::= SEQUENCE { serialDevIndex Integer32, serialAdminStatus INTEGER, serialOperStatus INTEGER, serialBaud UInteger32, serialParity INTEGER, serialDataBits UInteger32, serialStopBits UInteger32, serialFlowControl INTEGER, serialTerminalType INTEGER, serialTerminalLines UInteger32, serialTerminalColumns UInteger32, serialDevFd Integer32 } serialDevIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The index used to access rows in the awcSerialConfig table." ::= { awcSerialConfigEntry 1 } serialAdminStatus OBJECT-TYPE SYNTAX INTEGER {up(1), down(2), testing(3), error(4)} MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the serial port." ::= { awcSerialConfigEntry 2 } serialOperStatus OBJECT-TYPE SYNTAX INTEGER {up(1), down(2), testing(3), error(4)} MAX-ACCESS read-only STATUS current DESCRIPTION "The status of the serial port." ::= { awcSerialConfigEntry 3 } serialBaud OBJECT-TYPE SYNTAX UInteger32 MAX-ACCESS read-create STATUS current DESCRIPTION "The baud rate of the serial port." ::= { awcSerialConfigEntry 4 } serialParity OBJECT-TYPE SYNTAX INTEGER {none(1), even(2), odd(3), one(4), zero(5)} MAX-ACCESS read-create STATUS current DESCRIPTION "The parity of the serial port." ::= { awcSerialConfigEntry 5 } serialDataBits OBJECT-TYPE SYNTAX UInteger32 (7..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of data bits of the serial port." ::= { awcSerialConfigEntry 6 } serialStopBits OBJECT-TYPE SYNTAX UInteger32 (1..2) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of stop bits of the serial port." ::= { awcSerialConfigEntry 7 } serialFlowControl OBJECT-TYPE SYNTAX INTEGER {none(1), swXonXoff(2), hwRtsCts(3), swHwBoth(4)} MAX-ACCESS read-create STATUS current DESCRIPTION "The flow control method of the serial port." ::= { awcSerialConfigEntry 8 } serialTerminalType OBJECT-TYPE SYNTAX INTEGER {teletype(1), ansi(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The terminal type of the serial port." ::= { awcSerialConfigEntry 9 } serialTerminalLines OBJECT-TYPE SYNTAX UInteger32 (16..50) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of lines while using terminal." ::= { awcSerialConfigEntry 10 } serialTerminalColumns OBJECT-TYPE SYNTAX UInteger32 (64..132) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of columns while using terminal." ::= { awcSerialConfigEntry 11 } serialDevFd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The I/O File Descriptor used to access the serial device." ::= { awcSerialConfigEntry 12 } -- ********************************************************************** -- * End of awcSerialDev parameters -- ********************************************************************** -- ********************************************************************** -- * awcFtp parameters -- ********************************************************************** defaultFileServer OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the file server to be used. Max. string length is 128 octets." ::= { awcFtp 1 } awcFileXferProtocol OBJECT-TYPE SYNTAX INTEGER {tftp(1), ftp(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol to be used for FTP (TFTP or FTP)." ::= { awcFtp 2 } awcFileXferUser OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the user in FTP. Max. string length is 128 octets." ::= { awcFtp 3 } awcFileXferPassword OBJECT-TYPE SYNTAX DisplayString (SIZE(0..128)) MAX-ACCESS read-create STATUS current DESCRIPTION "The password of the user in FTP. Max. string length is 128 octets." ::= { awcFtp 4 } -- awcFileXferCmdInvokeFileLoad OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Initiate loading of all specified files from the file server -- into the system FLASH." -- ::= { awcFtp 5 } -- awcFileXferCmdStatusFileLoad OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the most recent command to load the specified fileXferFile* -- files. Possible values: -- 0 = Operation completed successfully (or has not taken place). -- 2 = At least one file was not found on the file server. -- 12 = Insufficient memory to load all files. -- 22 = No file specified, or invalid file format. -- 35 = File format of at least one of the files is not supported. -- 68 = Operation is still in progress. Poll again later. -- 72 = Operation was started, but later was canceled." -- ::= { awcFtp 6 } -- awcFileXferCmdInvokeFileSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "Initiate saving of all specified fileXferFile* files -- to the file server from the system FLASH." -- ::= { awcFtp 7 } -- awcFileXferCmdStatusFileSave OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Status of the most recent command to save the specified -- fileXferFile* files. Possible values: -- 0 = O