|
James,
I am
getting the same errors when trying to run the MIB2TRAP command for the Veritas
mib 1 or Mib2 mibs
we had
just upgraded our NetView servers to 6.03.
Regards,
Ana Maria Salas
Systems
Engineer
EMS
Support
Email:Salasa@Aetna.com
Phone (860)
636-8054
Pager
(860)366-1140
1000 MIDDLE STREET
MIDDLETOWN, CT.
06457
Please send your replies to the list.
I am sorry but I cannot personally pursue user problems from the list.
You will have to call Support
and open a problem with them.
Personally, I have never seen a core as in mib2trap at any level.
Generally speaking, if you can load the MIB then mib2trap can parse it,
though it may not produce output if the required constructs are not present.
We did make enhancements to mib2trap in 6.0.3, and you might want to
just get that level and apply it, since you will have to sooner or later
anyway. If the Support guys you talk to cannot reproduce your problem
at the 6.0.3 level, then that is what they will tell you to do -- get
6.0.3.
You can of course still
read the MIB and take a shot at defining the traps manually if you want to.
If you make a mistake, there is not real harm done. When the real
trap comes in, you will see a "NO FMT FOUND" message in trapd.log and in the
events window which will tell you all about the trap and you can use that to
fix your trial definition.
Sorry but that's all I
can offer you.
Good luck.
James Shanks
Level 3 Support for Tivoli NetView for
UNIX and NT
Tivoli Software / IBM Software Group
|
| bducharme@avdl.com
02/06/2002 04:13 PM
|
To:
James Shanks/Raleigh/IBM@IBMUS
cc:
Subject: Réf. : Re: [nv-l] Load
mibs
|
It's an snmpv1 mib.
I tried mib2trap veritas.mib veritas
Got
an error Segmentation error (coredump)
Ben
"James
Shanks"
Pour : nv-l@lists.tivoli.com
<jshanks@us.i cc :
bm.com> Objet :
Re: [nv-l] Load mibs
2002-02-06
15:59
Loading a MIB will not alter trapd.conf in
NetView. Never has. You must
run /usr/OV/bin/mib2trap
to create an addtrap script which, if there are
TRAP-TYPE or
NOTIFICATION-TYPE statements in that MIB file, can then be
used to update
trapd.conf.
If you look at trapd.conf with xnmtrap and click OK when
you leave, this
will change the date on trapd.conf, as it is saved
again.
I don't understand what "MIBS" is. If you want your new
MIB o be copied
into /usr/OV/snmp_mibs, you must do that yourself.
You
didn't say whether your MIB is SNMP V1 Or SNMP V2. Remember that
if
V2, and you use xnmloadmib2 to load it, then you must use xnmbrowser2
to
view it. There are two loaders and two browsers and they do not
share the
same database.
Hope this helps
James
Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli
Software / IBM Software Group
bducharme@avdl.com
To:
02/06/2002 03:43 PM nv-l@lists.tivoli.co
m
cc:
Subject:
[nv-l] Load mibs
Netview 6.0.2
AIX
4.3
We are trying to ad mibs from veritas netbackup datacenter
3.4.2.
We have a Mib file. We use load mib but we don't see anything new in
the
trapd.conf or MIBS.
But the trapd.conf file have change
date.
What are we doing wrong ?
Ben
---------------------------------------------------------------------
To
unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional
commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an
Offical Tivoli Support forum. If you need immediate
assistance from Tivoli
please call the IBM Tivoli Software Group
help line at
1-800-TIVOLI8(848-6548)
|