Thanks, Don, but this is not the correct MIB variable. It does not give the
same information. What I am looking for is the table that gives the MAC
addresses of the devices that are connected to the individual Ethernet ports
[as given by the show mac command].
Just to further clarify, the switch is a Cisco 3548.
Mahesh
>>> "Davis, Donald" <donald.davis@firstcitizens.com> 03/14/02 08:55AM >>>
You probably want the MIB-2 variable that returns the ARP cache.
snmpwalk [target] .1.3.6.1.2.1.4.22.1.2
Don Davis
-----Original Message-----
From: Mahesh Tailor [mailto:MTailor@carilion.com]
Sent: Thursday, March 14, 2002 8:43 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] Slightly off the subject
Does anyone what the MIB variable is to obtain the information provided by
the show mac command on a Cisco 3500 switch?
Thanks.
Mahesh
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are
intended solely for the use of individual or entity to whom they are addressed.
If you are not the intended recipient or the person responsible for delivering
the electronic mail to the intended recipient, be advised that you have
received this electronic mail in error and that any use, dissemination,
forwarding, printing, or copying of this electronic mail is strictly
prohibited. If you have received this electronic mail in error, please
immediately notify the sender by return mail.
==============================================================================
|