If you have 20 interfaces for 1 router, you are going to have 20 top level
icons representing each interface (given each interface to have its own
subnet).
IMO this is desirable. From a topology standpoint, this will help you to
properly manage your network.
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: Mike.Walsh@us.ing.com [mailto:Mike.Walsh@us.ing.com]
Sent: Tuesday, April 30, 2002 11:56 AM
To: nv-l@lists.tivoli.com
Subject: [nv-l] OBJECT NAMES / IP ADDESSES
I don't know if it can be done but sure would like a fix.
Is there a means within Netview to discover a device such as a cisco router
by it's name and only display a single icon for it. In some cases I have
as many as 20 icons for the same router. I have considered putting them
all in a location icon but that seems like a lot of work with very little
return.
Thanks,
Mike
Mike Walsh
****Please Note - New EMAIL Address mike.walsh@us.ing.com*********
612-342-3118
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|