Hi Peter,
there is an accepted Enhancement Request (MR1001014355) for that.
But I don't know when this feature will be available. I don't know the
plans
of development.
MfG./ Best regards
Hendrik Zahn (L2 EMEA Tivoli NetView Support)
__________________________________
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
Ingleson Peter <Peter.Ingleson@gerlingncm.com> on 22.10.2002 17:40:05
To: Ingleson Peter <Peter.Ingleson@gerlingncm.com>
cc: "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
Subject: RE: [nv-l] problems applying web client scopes
Hendrik,
Thanks this has fixed my issue, will this be changed in future releases?
Regards
Peter
-----Original Message-----
From: Hendrik Zahn [mailto:hendrik.zahn@de.ibm.com]
Sent: Tuesday, October 22, 2002 3:04 PM
To: Ingleson Peter
Cc: 'nv-l@lists.tivoli.com'
Subject: Re: [nv-l] problems applying web client scopes
Hi Peter,
there is a limitation/restriction of current design.
It is not enough to have the default map (with name default) opened but
you must have opened this map in r/w mode.
This is an information from development.
MfG./ Best regards
Hendrik Zahn (L2 EMEA Tivoli NetView Support)
__________________________________
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
Ingleson Peter <Peter.Ingleson@gerlingncm.com> on 22.10.2002 14:51:41
To: "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
cc:
Subject: [nv-l] problems applying web client scopes
List,
Running AIX 4.3.2 with NV v 7.1.2.
I'm having problems applying a scope to users of the webclient
(standalone).
When ever I apply the scope, I can log them in but they cannot open a map,
it always state that the console (or console daemon) needs to be running
(it
is). When I quit and log in as a user without a scope this works fine. I
have saved the configuration via the gui, and checked that the entries are
added to netviewrealm.properties, the scope is added to the scopeinfo.xml
file. I only have one map, and I have restarted the webserver daemon since
the config change.
Any thoughts appreciated.
Regards
Peter Ingleson
Privileged/Confidential Information may be contained in this message. If
you
are not the addressee indicated in this message (or responsible for
delivery
of the message to such person), you may not copy or deliver this message to
anyone. In such a case, you should destroy this message and kindly notify
the sender by reply e-mail.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
Privileged/Confidential Information may be contained in this message. If
you
are not the addressee indicated in this message (or responsible for
delivery
of the message to such person), you may not copy or deliver this message to
anyone. In such a case, you should destroy this message and kindly notify
the sender by reply e-mail.
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|