On the same subject, the key might be router sysname. We have a problem with
our PIX firewalls because the replication of the configuration from one box to
the other uses the same sysname. Therefore HSRP processing doesn't handle this
correctly. NetView cannot tell when it switches because the primary and
secondary devices have the same sysname. Anyone have an idea on how to work
around this?
> -----Original Message-----
> From: Leslie Clark [mailto:lclark@us.ibm.com]
> Sent: Thursday, October 03, 2002 7:55 AM
> To: nv-l@lists.tivoli.com
> Subject: Re: [nv-l] HSRP
>
>
>
> I think that may be proper. It knows which device is
> currently using that
> address, and draws only that connection. When it knows the interface
> is HSRP, it checks it every 5 minutes by pulling the sysname of the
> device that answers an snmpget to that address, and if it has moved
> to the other switch, it will move the connection. At netmon
> startup, it
> will probably delete and add the interface as well.
>
> You should be sure to discover the actual switches by some address
> that is not involved in HSRP, such as the loopback or an ethernet
> or something stable like that.
>
> Cordially,
>
> Leslie A. Clark
> IBM Global Services - Systems Mgmt & Networking
> Detroit
>
>
>
>
>
> Michel.Grossenbac
>
> her@coop.ch To:
> nv-l@lists.tivoli.com
> cc:
>
> 10/02/2002 05:00 Subject:
> [nv-l] HSRP
> AM
>
>
>
>
>
>
>
>
> Hiyas together
> first of all, I lost my link to the mailinglist archive so maybe this
> question has already been answered. Anybody could send me the
> link please?
> 8)
>
> and now to the main question.
>
> AIX 4.3.3 ML 9
> NetView 7.1.2
>
> We got some L3 Swiches (Cisco 6509) which have HSRP for their
> VLANs. We
> always have 2 Switches to maintain one building so one is the
> master for
> some VLANs and the other is the Master for the others. The
> Problem now is,
> I get all those Switches and the symbols show me that NetView
> knows they
> are routers (L3 Switches) but it doesnt connect all to the Subnets it
> should, it always takes one proper and the other just shows up in the
> Subnets itself and not on the connection Submap.
> I tried it now with the % in front of every IP Address of
> those VLANs but
> still NetView just makes one proper and the other not. Also
> deleted them
> and discovered them again, no change.
> Anyone got an Idea why this happens?
>
> Thanks in Advance
>
> Michel Grossenbacher
>
>
> Coop
> Michel Grossenbacher
> Systemtechnik/Telekommunikation
> Network Management Systems Verantwortlicher
> Telefon: +41 61 336 57 68
> Telefax: +41 61 336 57 57
> michel.grossenbacher@coop.ch
> Pikett Telekommunikation: +41 79 219 73 77
> http://telekommunikation.hs.coop.ch
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
> For additional commands, e-mail: nv-l-help@lists.tivoli.com
>
> *NOTE*
> This is not an Offical Tivoli Support forum. If you need immediate
> assistance from Tivoli please call the IBM Tivoli Software Group
> help line at 1-800-TIVOLI8(848-6548)
>
>
|