nv-l
[Top] [All Lists]

RE: [nv-l] snmpset Command Line Usage

To: "'Gareth Holl'" <gholl@us.ibm.com>
Subject: RE: [nv-l] snmpset Command Line Usage
From: "Bursik, Scott {PBSG}" <Scott.Bursik@pbsg.com>
Date: Tue, 17 Dec 2002 14:16:14 -0600
Cc: "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
That works for me perfectly. It was the MIB INstance 24 that was throwing me off. Thank You!
 
 

Scott Bursik
Event Systems Management
Pepsico Business Solutions Group
(972) 334-3757
scott.bursik@pbsg.com


-----Original Message-----
From: Gareth Holl [mailto:gholl@us.ibm.com]
Sent: Tuesday, December 17, 2002 2:12 PM
To: Bursik, Scott {PBSG}
Cc: 'nv-l@lists.tivoli.com'
Subject: Re: [nv-l] snmpset Command Line Usage


snmpset -c <write_community_name> <somenode> .1.3.6.1.4.1.2.6.30.2.1.5.24  Integer  2

Ensure that the write community name is defined on the agent for "somenode" to allow remote nodes to have set access. You may also need to use a particularly format of its name, short or fully qualified or even IP address so that the association with the community name is made correctly. You will need the leading dot for the OID and the instance tacked on after the OID. Finally you need to use the correct variable type which is this case looks as if would be Integer.

What errors were you getting ?
Can you use the snmpget command to query the same OID on the same device ?
Add the -d option to dump the PDU's and see if that gives you any clues.

Gareth Holl
Staff Software Engineer
gholl@us.ibm.com

IBM Software Group - Tivoli Brand
Research Triangle Park,  North Carolina.



"Bursik, Scott {PBSG}" <Scott.Bursik@pbsg.com>

12/17/2002 10:13 AM

       
        To:        "'nv-l@lists.tivoli.com'" <nv-l@lists.tivoli.com>
        cc:        
        Subject:        [nv-l] snmpset Command Line Usage



NetView 6.0.3 AIX 4.3.3
 
I am having some trouble with the snmpset command and was wondering if someone could give me an example using the following information:
 
Hostname: somenode.pepsi.com
MIB: .1.3.6.1.4.1.2.6.30.2.1.5
MIB Instance: 24
SNMP Set Value: 2
Integer
ReadWrite Community Name: private
 
Timeout, Retries, Port are all default.
 
Thank You Very Much!

Scott Bursik
Event Systems Management

Pepsico Business Solutions Group

(972) 334-3757

scott.bursik@pbsg.com


 ---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web