Not easily ... actually very complicated.
The only easy options you have are the "Propigate Most Critical/Compound
Propigated". You can try to use the Ack system, but I needed to add 500 or
so lines of code using the API to get it to work the way I wanted.
Best of luck,
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: Qureshi, Fawad [mailto:Fawad.Qureshi@ssa.gov]
Sent: Thursday, February 13, 2003 9:26 AM
To: 'nv-l'
Subject: [nv-l] Color propogation through submaps
Hi all,
Netview 7.1.3 on AIX 4.3.3
Can I set Netview to propagate a certain color (say Burgundy) all the way to
top map if a critical device is down and a normal yellow (default) if a
non-critical device is down? The way to define a critical device to Netview
maybe via setting the sysLocation field to Critical and/or Major.
Cheers,
Fawad Qureshi
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|