###########################################################################
#
# snmpd.conf
#
#   - created by the snmpconf configuration program
#
###########################################################################
# SECTION: Access Control Setup
#
#   This section defines who is allowed to talk to your running
#   snmp agent.

# rocommunity: a SNMPv1/SNMPv2c read-only access community name
#   arguments:  community [default|hostname|network/bits] [oid]

rocommunity  public  

# rwcommunity: a SNMPv1/SNMPv2c read-write access community name
#   arguments:  community [default|hostname|network/bits] [oid]

rwcommunity  public  



###########################################################################
# SECTION: Extending the Agent
#
#   You can extend the snmp agent to have it return information
#   that you yourself define.

# pass: Run a command that intepretes the request for an entire tree.
#   The pass program defined here will get called for all
#   requests below a certain point in the mib tree.  It is then
#   responsible for returning the right data beyond that point.
#   
#   arguments: miboid program
#   
#   example: pass .1.3.6.1.4.1.2021.255 /path/to/local/passtest
#   
#   See the snmpd.conf manual page for further information.
#   
#   Consider using "pass_persist" for a performance increase.

pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat









###########################################################################
# SECTION: Trap Destinations
#
#   Here we define who the agent will send traps to.

# trapsink: A SNMPv1 trap receiver
#   arguments: host [community] [portnum]

trapsink  tivoli  

# trap2sink: A SNMPv2c trap receiver
#   arguments: host [community] [portnum]

trap2sink  tivoli  

# informsink: A SNMPv2c inform (acknowledged trap) receiver
#   arguments: host [community] [portnum]

informsink  tivoli  

# authtrapenable: Should we send traps when authentication failures occur
#   arguments: 1 | 2   (1 = yes, 2 = no)

authtrapenable  1



###########################################################################
# SECTION: System Information Setup
#
#   This section defines some of the information reported in
#   the "system" mib group in the mibII tree.

# syslocation: The [typically physical] location of the system.
#   arguments:  location_string

syslocation Unknown (edit /etc/snmp/snmpd.conf)
syslocation  "VMWare Red Hat 8.0 - Malkovich"

# syscontact: The contact information for the administrator
#   arguments:  contact_string

syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
syscontact  "Helder Garcia"

# sysservices: The proper value for the sysServices object.
#   arguments:  sysservices_number

sysservices 12



#
# Unknown directives read in from other files by snmpconf
#
com2sec notConfigUser  default       public
group   notConfigGroup v1           notConfigUser
group   notConfigGroup v2c           notConfigUser
view    systemview     included      system
access  notConfigGroup ""      any       noauth    exact  systemview none none