nv-l
[Top] [All Lists]

RE: [nv-l] xnmsnmpconf

To: "'Bursik, Scott {PBSG}'" <Scott.Bursik@pbsg.com>, nv-l@lists.tivoli.com
Subject: RE: [nv-l] xnmsnmpconf
From: "Davis, Donald" <donald.davis@firstcitizens.com>
Date: Mon, 3 Mar 2003 14:13:02 -0500
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Mon, 03 Mar 2003 19:47:59 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm

Scott,
When you make a change to netmon's SNMP configuration it takes a while to rebuild the cache.
I have it take up to 15 minutes to respond to demandpoll requests after making a config change.
Don Davis



-----Original Message-----
From: Bursik, Scott {PBSG} [mailto:Scott.Bursik@pbsg.com]
Sent: Monday, March 03, 2003 1:50 PM
To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] xnmsnmpconf


I found an IP address on the node listed in the SNMP configuration. I
deleted it and made the correct entry and when I run the xnmsnmpconf -res it
now shows the correct data.

I seem to have another issue though. I right click an object in the map and
choose demand poll and it just sits there forever. The community name for
the object is good and I don't get a time out. I have tried several nodes
with the same result.

-----Original Message-----
From: Bursik, Scott {PBSG}
Sent: Monday, March 03, 2003 12:28 PM
To: nv-l@lists.tivoli.com
Subject: [nv-l] xnmsnmpconf

NetView 6.0.3 AIX 4.3.3

I am having issues with several nodes and their community strings.

The node is listed as not supporting SNMP in its description, although it
does have SNMP enabled.

I run the xnmsnmpconf -res hostname and it shows an incorrect community
name. I launch xnmsnmpconf and added the hostname specifically and the
correct community name. I go back to the command line and run xnmsnmpconf
-clearCache and then look it up again and I still have the wrong community
name. I looked to make sure there was not an issue with the subnet being
defined somewhere else in the configuration and that doesn't seem to be the
issue.

Has anyone else seen this? Am I missing something?

Thanks,

Scott Bursik
Pepsico Business Solutions Group
Event Systems Management
972-334-3757
scott.bursik@pbsg.com
 


---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)

------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.

==============================================================================

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web