Netview will not properly discover the interfaces on the routers without a NAT
scheme. The interfaces on one router will be recursively move from to router as
the interfaces are discovered on a different device.
-----Original Message-----
From: John M Gatrell [mailto:John.Gatrell@uk.ibm.com]
Sent: Friday, March 14, 2003 10:47 AM
To: 'nv-l@lists.tivoli.com'
Subject: Re: [nv-l] Trap Customization
It depends. Just polling routers which have some duplicated interfaces,
NetView can cope with.
If you wish to see the routers beyond such interfaces, then you would need
a CNAT solution.
NetView should be ok provided for every loopback address you also put the
address a 2nd time in netmon.seed with a dollar sign to force snmp polling.
e.g.
1.2.3.4 #Router
$1.2.3.4 #Force snmp
If you wish traps to be picked up correctly (as well as polls), then on the
routers you may wish to force the source ip address of the traps to the
same as the polled loopback
address. On a Cisco this would be
snmp-server trap-source interfacename
Bernard wrote:
>I have received a weird request from our net architecture staff.
>They want to setup routers in different countries with the same subnets
(and even same addresses) on their interfaces.
>Those subnets would not be routed in the entire network, only locally so
that on a strict routing point of view that's no problem.
John Gatrell, B.A. Physics, CCNA
RMSC - IBM UK's Remote Managed Services Centre
Tel: 01932-81-4732 Internal 814732
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|