nv-l
[Top] [All Lists]

[nv-l] How does NetView determin the selection name of a device

To: nv-l@lists.tivoli.com
Subject: [nv-l] How does NetView determin the selection name of a device
From: "Alan E. Hennis" <Hennis_Alan_E@cat.com>
Date: Mon, 17 Mar 2003 10:57:50 -0600
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Mon, 17 Mar 2003 17:02:15 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
Esteemed List Members

Here is my configuration

      NetView 7.1.3 FixPack 1
      RedHat Linux 7.2

Can anyone provide some insight as to how NV selects the IP address used to
manage a device? Or more specifically how it selects the name of the
device? I have a Cisco router with the following interfaces

      !
      interface Loopback0
       ip address 172.22.97.69 255.255.255.252
      !
      interface Serial0
       ip address 172.22.97.66 255.255.255.252
      !
      interface FastEthernet0
       ip address 172.22.34.1 255.255.255.0

Here are my seed file entries.

      172.22.97.69             # cimlpeor - This is the loopback address
      %172.22.97.65            # cimlpeor hub - This is used for our BRP
because we have two hub routers one active and one standby

Here are my DNS entries

      Name:   cimlpeor.corp.cat.com       <=== This is the loopback
      Address: 172.22.97.69
      Name:   cimlpeor.corp.cat.com                    <=== This is the WAN
      Address: 172.22.97.66
      Name:   ciml34001.pic.cat.com                    <=== This is the
Ethernet
      Address: 172.22.34.1

I have manually added this device (i.e. Edit -> Add -> Object...) using the
loopback address. The device is added as cimlpeor.corp.cat.com. I do a
demand poll to quickly discover the remaining interfaces and NetView
changes the name of the device to "ciml34001".

I have done a lot of reading about the optimal setup for DNS. Put the
loopback into the forward and reverse lookup and the remaining interfaces
only into the reverse. However for political reasons I may not be able to
do that. I have also read posting about forcing NetView to use the loopback
address for management. I am still a bit confused as to why NetView selects
the device name of ciml34001 instead of what I want to use which is
cimlpeor.



Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e@cat.com



---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web