i FINALLY TAKE A LOOK AT NETMON.TRACE AND I DISCOVER SOMETHING :
netmon: No seed file is used. Cannot reload it
netmon: No seed file is used. Cannot reload it
netmon: No seed file is used. Cannot reload it
netmon: No seed file is used. Cannot reload it
i simply change the name of my seed file in serversetup and press apply and
reput the name before and press apply again and
netview finally has been able to discover my network
thanks
-----Message d'origine-----
De : D'Apice, Dominic [mailto:D.D'Apice@SAQ.qc.ca]
Envoyé : April 22, 2003 3:38 PM
À : Netview - List (E-mail)
Objet : TR: [nv-l] Discovery failed after a " Restart a automatic map
gen eration"
any idea ?
i installed fix IY38709revA and IY41984 but no succes
Netview still not re-discover my network....
thanks
Dominic
-----Message d'origine-----
De : D'Apice, Dominic [mailto:D.D'Apice@SAQ.qc.ca]
Envoyé : April 22, 2003 11:09 AM
À : Netview - List (E-mail)
Objet : [nv-l] Discovery failed after a " Restart a automatic map
generation"
Hi All,
I installed Netview 7.1 on my new pre-production server, all seem to be
ok, Netview discoved all node of my network.
I stop Netview and did a upgrade of my pre-prod server to 7.1.3 with the
/usr/OV.back.v7r1 of my production server (netview 7.1).
After that i saw all my netview database on the map. Then I did a
"restart a automatic map generation" to see if the discovery will be
ok on my pre-prod server...
Netview did not re-discover my network.
I only see a couple of machines, these that is on the same subnet
of the netview in pre-production.
the configuration (snmp,seed file...) is the same of my netview in
production, so Netview
should has the same map after the discovery... i don't understand
(even if a did a "restart a automatic map
generation...)
----------------------------------------------------------------------------
------------------------------
i also got this error (on both server)
04/17/03 10:07:36 EXCEPTIONS: authentication error: invalid community
name: xxxx
i resolve this error putting this in both (netview server) snmpd.conf file
community public 172.26.14.14 255.255.255.255
community public 172.20.4.69 255.255.255.255
Do i need to put the same line but instead of public i should put the
others community i have to resolve the failed discovery ?
----------------------------------------------------------------------------
----------------------------
It is true that because i did a upgrade from nv 7.1 to nv 7.1.3, i need
to apply the fix "IY41984" and add the following 2 lines to file
/usr/OV/bin/netnmrc.pre ?
NV_NETMON_NEW_NVSNMP__OFF=TRUE
export NV_NETMON_NEW_NVSNMP__OFF
because when we did a upgrade there is a bug which causes all community
settings to be ignored :
NV 7.1.3 performs every snmpget using the "public" community
Please i need help, to know why Netview failed to discover my entire
Network
----------------------------------------------------------------------------
-----------------------------
Thanks
Dominic
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|