Hi Leslie and thanks for this precision, i will read on this subject
so, all i have to do now is tho delete the node (from all map ?) and wait
until netview re-discover it ?
thanks to confirm me this ...
Dominic
-----Message d'origine-----
De : Leslie Clark [mailto:lclark@us.ibm.com]
Envoyé : May 6, 2003 9:47 AM
À : nv-l@lists.tivoli.com
Objet : RE: [nv-l] multiple same switch
As Paul pointed out, this is the result of an improper cut and paste. You
should only be cutting (not copying) routers and networks at the IP
Internet level of the map, and always choose 'from THIS location', never
'from ALL locations'. And you should only be pasting things into Location
submaps (containers). That way you will never get into trouble. Read more
about this subject:
See: User's Guide Chap 3 Working with maps, Exploring the Submap Hierarchy.
See: AdminGuide Chap 3, Customizing Symbol Placement, and Partitioning
Submaps
See: AdminGuide Chap 3, Customizing a Graphical Map
See: AdminGuide Chap 3, Understanding Submap Presentation, Planes
You are probably misunderstanding the reason the switch appears where it
does. That switch looks like a single-address device. Those you cannot
move, since they are placed by Netview in the subnet or subnets in which
they belong. The product will allow you to do a lot more than you should
do. That capability is there to allow you to develop your own network
management applications. To use the applications delivered with Netview
(ipmap, for example) stick to the advice at the top of this note and you
will be fine.
To clean up a 'floater', it is best to delete the node (from ALL submaps)
and rediscover it.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
"D'Apice,
Dominic" To: James
Shanks/Raleigh/IBM@IBMUS, nv-l@lists.tivoli.com
<D.D'Apice@SAQ.qc cc:
.ca> Subject: RE: [nv-l] multiple
same switch
05/05/2003 01:02
PM
My Netview of production the switch is show only once...
what should i do to have only once switch ? before the cut and paste it was
correct but not in the good location...
Dominic
-----Message d'origine-----
De : James Shanks [mailto:jshanks@us.ibm.com]
Envoyé : May 5, 2003 12:55 PM
À : nv-l@lists.tivoli.com
Objet : Re: [nv-l] multiple same switch
It probably means you don't have SNMP access to the switch, so all the
interfaces resolve to separate nodes.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
"D'Apice, Dominic" <D.D'Apice@SAQ.qc.ca>
05/05/2003 12:46 PM
To: "Netview - List (E-mail)" <nv-l@lists.tivoli.com>
cc:
Subject: [nv-l] multiple same switch
Hi all, netview 7.1.3 + fixpack 1 on aix
What dows it means when netview show a switch but in multiple (see the
file)
<<multiple same switch.jpg>>
thanks
Dominic D'Apice
* D.D'Apice@saq.qc.ca
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
#### multiple same switch.jpg has been removed from this note on May 05,
2003 by James Shanks
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|