nv-l
[Top] [All Lists]

RE: [nv-l] netviewd daemon behavior

To: nv-l@lists.tivoli.com
Subject: RE: [nv-l] netviewd daemon behavior
From: "Bursik, Scott {PBSG}" <Scott.Bursik@pbsg.com>
Date: Wed, 23 Jul 2003 10:36:25 -0500
Delivered-to: mailing list nv-l@lists.tivoli.com
Delivery-date: Wed, 23 Jul 2003 20:36:55 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
List-help: <mailto:nv-l-help@lists.tivoli.com>
List-post: <mailto:nv-l@lists.tivoli.com>
List-subscribe: <mailto:nv-l-subscribe@lists.tivoli.com>
List-unsubscribe: <mailto:nv-l-unsubscribe@lists.tivoli.com>
Mailing-list: contact nv-l-help@lists.tivoli.com; run by ezmlm
Thanks for the answer Don. In my scripts I used to check for daemon issues
by performing a /usr/OV/bin/ovstatus | grep NOT and if I got a return I
would page. Now that the netviewd daemon is there and either running or not
running as normal behavior, does anyone have any suggestions as how to
perform daemon status check in scripts and ignore the netviewd daemon?

Thanks,

 
 
Scott Bursik
Enterprise Systems Management
PepsiCo Business Solutions Group
scott.bursik@pbsg.com
(972) 963-1400
 
 
-----Original Message-----
From: Davis, Donald [mailto:donald.davis@firstcitizens.com] 
Sent: Wednesday, July 23, 2003 10:31 AM
To: Bursik, Scott {PBSG}; nv-l@lists.tivoli.com
Subject: RE: [nv-l] netviewd daemon behavior

Scott, 
Anytime you have the Read/Write map open, the netviewd daemon is stopped. 
Starting NetView with the "netview -dconsole" switch stops the netviewd
daemon. 
The netviewd daemon's purpose in life is to run the R/W map when no one else
is using it. 
Don Davis 
First Citizens Bank 
Systems Engineer Consultant 
Raleigh, NC.  27603-3526 
  

-----Original Message----- 
From: Bursik, Scott {PBSG} [mailto:Scott.Bursik@pbsg.com] 
Sent: Wednesday, July 23, 2003 10:55 AM 
To: nv-l@lists.tivoli.com 
Subject: [nv-l] netviewd daemon behavior 

NetView 7.1.3 - AIX 4.3.3 
I am a little confused about the behavior of the netviewd daemon. I have it 
set to automatically start and it does, but I have health scripts that check

for stopped daemons and from time to time netviewd is not running and when 
an ovstatus is performed on that daemon, it reports that it exited normally.

Should the netviewd daemon stop on its own and what is the condition where 
this might happen? 
Thanks, 
Scott Bursik 
PepsiCo Business Solutions Group 


--------------------------------------------------------------------- 
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com 
For additional commands, e-mail: nv-l-help@lists.tivoli.com 
*NOTE* 
This is not an Offical Tivoli Support forum. If you need immediate 
assistance from Tivoli please call the IBM Tivoli Software Group 
help line at 1-800-TIVOLI8(848-6548) 

---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe@lists.tivoli.com
For additional commands, e-mail: nv-l-help@lists.tivoli.com

*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web