nv-l
[Top] [All Lists]

Re: [nv-l] NV 7.1.4 and TEC forwarding / Correlation Gateway

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] NV 7.1.4 and TEC forwarding / Correlation Gateway
From: James Shanks <jshanks@us.ibm.com>
Date: Mon, 20 Oct 2003 15:29:46 -0400
Delivery-date: Mon, 20 Oct 2003 20:36:01 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l-digest@lists.us.ibm.com

Don't assume anything.  
Non-TME or not nvserverd will try to use the SCE on the gateway.  That is independent of the transport mechanism.
If you are having problems with it I would comment out the three new lines in your tecint.conf and restart nvserverd
BufferEvents=YES
UseStateCorrelation=YES
StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml


James Shanks
Level 3 Support  for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group



Jane Curry <jane.curry@skills-1st.co.uk>
Sent by: owner-nv-l-digest@lists.us.ibm.com

10/20/2003 03:10 PM
Please respond to nv-l

       
        To:        NetView mailing list <nv-l@lists.us.ibm.com>
        cc:        
        Subject:        [nv-l] NV 7.1.4 and TEC forwarding / Correlation Gateway



I have upgraded my NV 7.1.3 on AIX 5.1 ML03, upto NV 7.1.4.  I have NOT
upgraded my TEC to 3.9 - it's at TEC 3.8 Fixpack 1.
My /usr/OV/conf/tecint.conf seems to have 3 lines added:
BufferEvents=YES
UseStateCorrelation=YES
StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml

My original ServerLocation and ServerPort are unchanged at "poppet" and
"0" respectively (ie non-TME communications.  I DO have an SCE TEC
gateway but I assume nvserverd isn't using it as it is using non-TME
comms.  My ruleset in tecint.conf is TEC_ITS.rs (which looks like the
new one with NV 7.1.4 as it does not contain the TEC_ITS_L2_NODE_STATUS
events).

Although I was getting NetView events through to TEC immediately after
the NetView upgrade, they are not coming through any longer - no events
from NetView show in wtdumprl.  nvtecia -reload doesn't seem to change
anything.  There is nothing in my nvserverd cache file.

I cannot find any documentation in the NV 7.1.4 Release notes that
reference the TEC sce gateway, nor can I see anything in the new 7.1.4
Admin Guide.  The TEC 3.9 documentation I have doesn't seem to have
anything either.

Anyone have a reference document for "What's changed between NV 7.1.3 /
TEC 3.8 and NV 7.1.4 / TEC 3.9, especially with reference to the State
Correlation Gateway for TEC???

Cheers,
Jane

--
Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2003 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights reserved.




<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web