Hi Folks,
How do I get the new Netview 7.1.4 (SOLARIS) and its related documentation?
thanks,
claudius.
-----Original Message-----
From: Ray Westphal [mailto:westphal2002@charter.net]
Sent: October 21, 2003 3:40 PM
To: nv-l@lists.us.ibm.com; nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Trying to upgrade to 7.1.4
On Tue, 21 Oct 2003 14:29:58 -0400
George,
The /tmp/update.log reports snmpget fails in the install.
One of the reasons given is nvsecd is not running. I try
to run the snmpget with nvsecd stopped and it fails with
permission denied. This is not the behavior I see on my
other servers.
Frankly - I'm out of ideas now.
Thanks,
Ray Westphal
Enterprise Rent-A-Car
George deSocio <desocio@us.ibm.com> wrote:
>Check /usr/OV/security/cmds for unsecure versions of the
>snmp utility
>which run without the nvsecd daemon active.
>Specifically, there is a snmpget_unsecure command.
>
>Why do you think the problem is security related?
>
>
>Regards,
>Geo.
>
>George deSocio
>IBM Americas Support - Distributed Network Management
>Dept 46-E1ZA
>IBM B660 CC102
>HWY 54 & 600 Park Offices
>Research Triangle Park, NC 27709
>
>919-254-2259 (T/L 444) Fax: 919-543-7936 (T/L 441)
>
>E-Mail: desocio@us.ibm.com
>
>Expand your Tivoli product knowledge by participating in
>Support Technical
>Exchange:
>http://www-3.ibm.com/software/sysmgmt/products/support/supp_tech_exch.html
>
>
>
>
>"Ray Westphal" <westphal2002@charter.net>
>Sent by: owner-nv-l-digest@lists.us.ibm.com
>10/21/2003 12:14 PM
>Please respond to nv-l
>
>
> To: nv-l@lists.us.ibm.com,
>nv-l@lists.us.ibm.com
> cc:
> Subject: Re: [nv-l] Trying to upgrade to
>7.1.4
>
>
>
>I think the problem is NetView security related. Should I
>be able to run snmpget with security off and the nvsecd
>down? This will only work if nvsecd is running. nvauth
>-login works and reports security is off.
>
>Thanks
>Ray Westphal
>Enterprise Rent-A-Car
>
>On Tue, 21 Oct 2003 15:25:16 +0100
> Jane Curry <jane.curry@skills-1st.co.uk> wrote:
>>I did a similar upgrade but my platform was AIX 5.1 - no
>>problems. Have you checked that you have the AIX 5.2
>>prereq and that you are running the correct version of
>>the snmpd as doc'ed in the Release Notes?
>>Cheers,
>>Jane
>>
>>Westphal, Raymond W wrote:
>>
>>>Hello Everyone.
>>>
>>>NV 7.1.3 on AIX 5.2 -
>>>I'm trying to upgrade to 7.1.4 via the Framework
>>>installation method.
>>>The install gets to nearly the end and then fails with
>>>errors. You can
>>>actually start most of the daemons except nvlockd.
>>>nvlockd fails
>>>because the /etc/services does not have any NetView
>>>services anymore.
>>>I run all the checks before installation and I have even
>>>increased my
>>>NetView file system sizes to maximum possible size but I
>>>still get the
>>>following error:
>>>
>>>Something went wrong:
>>>Media Packet: "/cdrom/FILE33.PKT"
>>>tnvlab01:FAILED (soft error) .......
>>>
>>>Here are the last few lines of the the /tmp/update.log:
>>> * Running customize script for fileset
>>>OVXMPAPI-MAN.
>>> * Making links....
>>> * Running customize script for fileset IBMVA-RUN.
>>>NOTE: Installing new version of /usr/OV/bin/netview
>>> Old version in /usr/OV/bin/#netview
>>>Waiting on SNMP Agent to become operational.
>>>0513-029 The snmpd Subsystem is already active.
>>>Multiple instances are not supported.
>>>NOTE: Starting trapgend
>>>NOTE: Starting mgragentd
>>>NOTE: Starting ovactiond
>>>NOTE: Starting nvcorrd
>>>NOTE: Starting nvpagerd
>>>NOTE: Starting actionsvr
>>> object manager name: actionsvr
>>> behavior: OVs_WELL_BEHAVED
>>> state: NOT_RUNNING
>>> PID: 24900
>>> last message:
>>> exit status: exit(255)
>>>
>>>customize: Failure performing ovstart of actionsvr
>>>ERR_0041_161
>>>ERR_0041_161
>>>+ dspmsg -s 5 nv6000.cat 9999 customize: Failing
>>>customize with
>>>exit code %s\n 2
>>>+ 1>> /tmp/update.log
>>>customize: Failing customize with exit code 2
>>>ERROR: Customize script for fileset IBMVA-RUN exited
>>>with code 2.
>>>ERR_cfgbf_001
>>>nvconfigbf: Failing doing configuration with exit code
>>>2
>>>base: Failure running script or command
>>>'/usr/OV/install/tools/nvconfigbf'
>>>ERR_bcfg_210
>>>base: Failing base.config with exit code 2
>>>I'd appreciate any suggestions, ideas or best wishes.
>>>
>>>Thanks in advance.
>>>Ray Westphal
>>>Enterprise Rent-A-Car
>>
>>
>>--
>>Tivoli Certified Consultant & Instructor
>>Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6
>>0EU, UK
>>Tel: +44 (0)1628 782565
>>Copyright (c) 2003 Jane Curry
>><jane.curry@skills-1st.co.uk>. All rights reserved.
>>
>>
>
>
>
|