[nv-l] Error when loading "CISCO-PROCESS-MIB.my" File

["Georg Gangl" <Georg.Gangl@brz.gv.at>]

Hi  Group members,

Today I wanted to load the "CISCO-PROCESS-MIB.my" MIB into NetView. The
loading failed with the Error Message:

Error detected while loading MIB File: .............. This MIB cannot
be loaded until the following problem is corrected:
Line 32: Error defining object: found 'MODULE-IDENTIFY'
Expected one of the following:
OBJECT-IDENTIFIER
OBJECT-TYPE
TRAP-TYPE
::=

The contents of the File looks like:
    +1  --
*****************************************************************
    +2  -- CISCO-PROCESS-MIB.my: MIB for CPU and process statistics
    +3  --
    +4  -- August 1998, Ramanathan R. Kavasseri
    +5  --
    +6  -- Copyright (c) 1998, 2001 by cisco Systems, Inc.
    +7  -- All rights reserved.
    +8  --
*****************************************************************
    +9  --
   +10  -- This mib was extracted from RFC xxxx
   +11
   +12  CISCO-PROCESS-MIB DEFINITIONS ::= BEGIN
   +13
   +14  IMPORTS
   +15          MODULE-IDENTITY,
   +16          OBJECT-TYPE,
   +17          Counter32,
   +18          Gauge32
   +19                  FROM SNMPv2-SMI
   +20          TimeStamp,
   +21          DisplayString
   +22                  FROM SNMPv2-TC
   +23          MODULE-COMPLIANCE,
   +24          OBJECT-GROUP
   +25                  FROM SNMPv2-CONF
   +26          ciscoMgmt
   +27                  FROM CISCO-SMI
   +28          Unsigned32, EntPhysicalIndexOrZero
   +29                  FROM CISCO-TC;
   +30
   +31
   +32  ciscoProcessMIB MODULE-IDENTITY
   +33          LAST-UPDATED    "200105180000Z"
   +34          ORGANIZATION    "Cisco Systems, Inc."
   +35          CONTACT-INFO
   +36                  "       Cisco Systems
   +37                          Customer Service
   +38
   +39                  Postal: 170 W Tasman Drive
   +40                          San Jose, CA  95134
   +41                          USA
   +42
   +43                     Tel: +1 800 553-NETS
   +44

I am not familiar with editing MIB Files. Can anybody please tell me
what I should do to make the "CISCO-PROCESS-MIB.my" File loadable.
Thank you very much for any help.

Cordially,

Georg Gangl

_____________________________
Ing. Georg Gangl
Bundesrechenzentrum Ges.m.b.H.
Hintere Zollamtsstrasse 4
A-1033 Wien
Gruppe I-PS-NW Netzwerke
Tel.:  00 43 (1) 711 23 - 3891 DW
Fax.: 00 43 (1) 711 23 - 3897 DW
mailto:Georg.Gangl@brz.gv.at 
--------------------------------------------------