nv-l
[Top] [All Lists]

Re: [nv-l] having problems starting ovtopmd

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] having problems starting ovtopmd
From: George deSocio <desocio@us.ibm.com>
Date: Fri, 23 Jan 2004 15:40:33 -0500
Delivery-date: Fri, 23 Jan 2004 21:08:42 +0000
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OF1AA66853.748B5563-ON87256E24.006D5317-85256E24.006FC21D@us.ibm.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com

Kevin,

I meant to ask,

Did you install NetView using the stand-alone command line on a machine that also has Framework installed?

The symptom you have is that there is more than one level of Framework shared libraries on the system.  You get a mixed bag via an incorrect LIBPATH from the command line.  netnmrc gets it right at boot time.

Regards,
Geo.

George deSocio
IBM Americas Support - Distributed Network Management
Dept 46-E1ZA
IBM B660  CC102
HWY 54 & 600 Park Offices
Research Triangle Park, NC  27709

919-254-2259 (T/L 444)  Fax: 919-543-7936 (T/L 441)

E-Mail:  desocio@us.ibm.com

Expand your IBM Tivoli product knowledge by participating in Support Technical Exchange:
http://www-3.ibm.com/software/sysmgmt/products/support/supp_tech_exch.html



George deSocio/Raleigh/IBM@IBMUS
Sent by: owner-nv-l@lists.us.ibm.com

01/23/2004 03:23 PM
Please respond to nv-l

       
        To:        nv-l@lists.us.ibm.com
        cc:        
        Subject:        Re: [nv-l] having problems starting ovtopmd




NetView daemons are ALL stopped via "/usr/OV/bin/ovstop nvsecd".  If you have another daemon such as the tdwdaemon or another 3rd part daemon registered in ovsuf, you will have to stop that too.  Basically when the last daemon is stopped (normally nvsecd because all others are dependent), ovspmd will shut itself down.



Regards,
Geo.

George deSocio
IBM Americas Support - Distributed Network Management
Dept 46-E1ZA
IBM B660  CC102
HWY 54 & 600 Park Offices
Research Triangle Park, NC  27709

919-254-2259 (T/L 444)  Fax: 919-543-7936 (T/L 441)

E-Mail:  desocio@us.ibm.com

Expand your IBM Tivoli product knowledge by participating in Support Technical Exchange:
http://www-3.ibm.com/software/sysmgmt/products/support/supp_tech_exch.html


Stephen Hochstetler/Austin/IBM@IBMUS
Sent by: owner-nv-l@lists.us.ibm.com

01/23/2004 02:43 PM
Please respond to nv-l

       
       To:        nv-l@lists.us.ibm.com

       cc:        

       Subject:        Re: [nv-l] having problems starting ovtopmd




Kevin,

There is an environment created when you do /etc/netnmrc that the programs run in. Finding the right libraries is part of that. If you do the command 'ovstart ovtopmd', it is actually telling ovspmd to start ovtopmd. However, if ovspmd was not started the right way, it will not have the proper environment to pass onto ovtopmd. ovtopmd will die with the message that you see

Let's try to fix this by doing:

ovstop (this should stop all the daemons)

/etc/netnmrc (this should start all the daemons with the right environment )


Stephen Hochstetler shochste@us.ibm.com
International Technical Support Organization at IBM
Office - 512-838-6198 (t/l 678) FAX - 512-838-6931

http://www.redbooks.ibm.com
<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web