Hi Folks,
I ran a search of the nv-l archives and found the
following post with no response.
We are planning a similar scenario, install of NV7.1.4
on Solaris 2.8 server with 2 NICs. Each NIC will
connect to a separate subnet, we would like to have NV
be able to discover and manage devices through both
NICs/subnets.
I have also searched on the Tivoli Support site and
found Reference # 1067500 (circa 11-08-2002):
"Multiple NIC's with NetView.
Problem
Can NetView discover/manage devices across multiple
NIC cards at once?
Solution
No, NetView cannot discover/manage devices across
multiple NIC cards. The reason for this is that
NetView binds to only one IP address."
Has anybody been able to successfully run NV with dual
NICs as I described above?
Regards,
Albert Wong
---------------------------------------------
Subject: [nv-l] Dual NIC and subnets on Netview
From: "Qureshi, Fawad" <Fawad.Qureshi@ssa.gov>
To: nv-l@lists.tivoli.com
Date: Fri, 18 Jul 2003 13:09:51 -0400
Netview 7.1.3 on AIX 4.3.3
I would like to understand the implications of adding
a second NIC in the Netview server connecting to a
different subnet. For example, the existing NIC on a
172.X.X.X and the second NIC on 192.X.X.X. We would
like to monitor some routers sitting on the 192
network and only way to get to this network would be
to connect directly by adding a second NIC in the
Netview server.
Appreciate any feedback.
Cheers,
Fawad Qureshi
_______________________________
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush
|