[Top] [All Lists]

Re: [nv-l] Problem with object

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] Problem with object
From: Jane Curry <jane.curry@skills-1st.co.uk>
Date: Sat, 23 Oct 2004 19:16:05 +0100
Delivery-date: Sat, 23 Oct 2004 19:17:08 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <5378E4D035D2D511BAA200508BAE15F109D45645@wil-po02.bbtnet.com>
References: <5378E4D035D2D511BAA200508BAE15F109D45645@wil-po02.bbtnet.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
User-agent: Mozilla Thunderbird 0.5 (X11/20040208)
I have used both these commands successfully with 7.1.4 - not sure what their official supported status is though, so do make sure you have a database backup first....


Hill, Channing wrote:

Do the following commands work in 7.x ?
ovtopofix -r </selection name or object ID>/
ovwdbdmap -d  </selection name or object ID>/
// I used these commands back in the pre 7.x days to delete objects that kept coming back. *//* */Channing Hill/*
*/EMS Analyst II/*
*/(252) 246-3642/*

*From:* owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Allison, Jason (JALLISON)
*Sent:* Friday, October 22, 2004 11:32 AM
*To:* nv-l@lists.us.ibm.com
*Subject:* RE: [nv-l] Problem with object

If you are able to find unique attributes to these sets of objects, you could write an API routine utilizing OVwDbDeleteObject looping thourgh each map/submap/object list. Ive done this before, but it was more of a tool to clean up messes I created in the OVwDB on development benches. Best of luck,
Jason Allison
Principal Engineer
ARINC Incorporated

 -----Original Message-----
*From:* owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com] *On Behalf Of *Leslie Clark
*Sent:* Friday, October 22, 2004 11:27 AM
*To:* nv-l@lists.us.ibm.com
*Subject:* Re: [nv-l] Problem with object

    In most cases those "Please" objects are removed automatically by
    map synchronization. You should only have to worry about the ones
    that are still there. If you find them in the map, using Locate,
    then delete them 'from all submaps'.

    If you find the same objects the next time, then it is one of two
    cases, I think:
    1) You have more than one map. Look under File..Open. If there is
    more than just the default map, open the others and do the deletes
    there as well.
    2) The object have been rediscovered. Check the object numbers.
    Each time they are discovered, they will have different object


    Leslie A. Clark
    IBM Global Services - Systems Mgmt & Networking

    *Javier Morate Guerrero <jmorate@carrefour.com>*
    Sent by: owner-nv-l@lists.us.ibm.com

    10/22/2004 04:05 AM
    Please respond to

        [nv-l] Problem with object



         When I clean up the databases (ovmapcount -a, ovmapcount -b,
    ovtopofix -A), I look at the output of ovtopofix and there are
    lines as:

         xxx.xxx.xxx.xxx (xxxxxxxxx) --   Please delete object from
    all maps.

         some objects them encounter them in the map and I erase them, but
    other but other objects not  encounter them, and in the following
    clean up
    they continue appearing.

         can nvmaputil.sh  be useful to me ?

          Un saludo,

    Francisco Javier Morate Guerrero
    Dpto. Gestión de Sistemas
    Carrefour España

Tivoli Certified Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2004 Jane Curry <jane.curry@skills-1st.co.uk>.  All rights 

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web