nv-l
[Top] [All Lists]

Re: [nv-l] webconsole launch command

To: nv-l@lists.us.ibm.com
Subject: Re: [nv-l] webconsole launch command
From: Brett Coley <bcoley@us.ibm.com>
Date: Fri, 29 Oct 2004 08:36:38 -0400
Delivery-date: Fri, 29 Oct 2004 13:36:33 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
The format of each "launch command line" is key/value pairs separated with spaces.
 
          The possible key names are:
 
            serverinfo   (e.g. "itchy.tivoli.com:8080"
                               or "primary.tivoli.com:8080,failover.tivoli.com:8080")
 
            host         (e.g. "itchy.tivoli.com")
 
            port         (e.g. "8080")
 
            scripturl    (e.g. "/netview/scripts/submapexplorer.js")
 
            targetnode   (e.g. "scratchy.tivoli.com" or "146.84.242.83")
 
            sctargetnode (e.g. "11:scratchy.tivoli.com")
 
            logconfig    (e.g. "/tmp/log4j.properties")
 
            username     (e.g. "netview")
 
            password     (e.g. "netview")
 
            javaoptions  (e.g. "-Xmx64m")
 
            nvwcoptions  (e.g. "--logconfig n:/wc-log4j.properties")
 

          of these keys the only ones that MUST be specified are:
 
            - either 'serverinfo' or 'host' (and optionally 'port' [default is 8080])
            - scripturl
            - either 'targetnode' or 'sctargetnode'
 
          [ Use 'sctargetnode' when using the convention that the 'targetnode'
            to be considered is represented by all characters AFTER the
            first colon. ]
 
        Example launch command lines (passed through stdin or via a TCP port):
 
          serverinfo=spud:8080 username=root password=root scripturl=/netview/scripts/submapexplorer.js targetnode=nvnt10.ma.dev.tivoli.com
          host=spud port=8080 username=root scripturl=/netview/scripts/submapexplorer.js targetnode=nvnt10.ma.dev.tivoli.com javaoptions="-Xmx88m"
 
Regards,
Brett
Tivoli Software/IBM
 
 
 
Friday, October 29, 2004 5:44 AM
To: nv-l@lists.us.ibm.com
cc:
From: Per Lütkemeyer <pel@dmdata.dk>
Subject: [nv-l] webconsole launch command



Hi,

Ref.: Netview 7.14 FP01

From TEC console it is possible to launch the Netview webconsole submap and more.
The webconsole has  two start .bat files.   nvwc.bat  and nvlaunch.bat
I guess that TEC uses the nvlaunch.bat

Does anyone have the syntax for the "stdinFile"  (se below) ????

From the nvlaunch.bat file:
:USAGE
echo      Usage: nvlaunch.bat [port <portNumber>] [stdin <stdinFile>]
echo             nvlaunch.bat [/h]
echo      Where:
echo             portNumber : TCP Port number for the NetView Web Console launcher
echo             stdinFile  : A file containing launch commands
echo             /h         : This usage statement
echo


Regards

Per Lütkemeyer
Teamleader, Systems Management
-------------------------------------------
DMdata a/s
Bytoften, DK8240 Risskov
E-mail: pel@dmdata.dk, web: www.dmdata.dk


<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web