[nv-l] snmp get with wron community name

[Guy Bukenbergs <fbukenbergs@mail.be>]

Hi,

> We have two groups of machines, routers which use the "mycom" as community 
> string and novell
> servers that use "public". It seems as if NetView accesses the routers twice 
> a day with the wrong 
> community name, it tries three times however with intervals of 2 seconds as 
> set in the default.
> What part of NetView does this ?
> More important how do I make it use the correct community string or stop it 
> from accessing the devices ?
>  
> SNMP configuration:
>                                                   community         timeout   
>    retry    Polling
> global default :    *.*.*.*                 public                 2.0        
>     3         5m
> IP wildcard    :    10.120.8.*           mycom               -               
> -          -
> Node            :    10.120.8.30         mycom               -               
> -          -

Regs
Guy Bukenbergs
-----------------------------------------------------
Mail.be, WebMail and Virtual Office
http://www.mail.be

Guy,

 

Dit is een betere versie :

 

SNMP configuration:

                                                  community         timeout      retry    Polling

global default :    *.*.*.*                 public                 2.0            3         5m

IP wildcard    :    10.120.8.*           mycom               -               -          -

Node            :    10.120.8.30         mycom               -               -          -

 

We have two groups of machines, routers which use the "mycom" as community string and novell

servers that use "public". It seems as if NetView accesses the routers twice a day with the wrong

community name, it tries three times however with intervals of 2 seconds as set in the default.

What part of NetView does this ?

More important how do I make it use the correct community string or stop it from accessing the devices ?

 

Koen

---

Van: Gooris Koen
Verzonden: vr 17/12/2004 12:14
Aan: fbukenbergs@mail.be
Onderwerp: NetView issue

Ik zal het probleem in het engels tikken, spaart je wat tijd waarschijnlijk.

 

SNMP configuration:

                                                  community         timeout      retry    Polling

global default :    *.*.*.*                 public                 2.0            3         5m

IP wildcard    :    10.120.8.*           mycom               -               -          -

Node            :    10.120.8.30         mycom               -               -          -

 

We have two groups of machines, routers which use the "mycom" as community string and novell

servers that use "public". It seems af if NetView accesses the routers twice a day with the wrong

community name, it tries three times with intervals of 2 seconds as set in the default.

What part of NetView does this ?

More important how do I stop it from happening ?

 

Koen