ahh ok thx
On Fri, 25 Feb 2005, James Shanks wrote:
>
>
>
>
>
> If you are using the netview rules shipped with TEC then severity should be
> set by them upon receipt of that event and then escalated as time goes on.
>
> If you don't want to use them, or can't, we added a switch to the
> tecint.conf file in FP02 to force nvserverd to send the severity slot for
> all NetView events the way he used to back in 7.1.3. That switch is
> NvserverdSendSeverityTecEvents=YES. If you regenerate your tecint.conf
> file from serversetup after applying FP02 it will automatically be added to
> tecint.conf but commented out. You can then uncomment it.
>
> James Shanks
> Level 3 Support for Tivoli NetView for UNIX and Windows
> Tivoli Software / IBM Software Group
>
>
>
> "Colin
> Mulkerrins"
> <Colin.Mulkerrins To
> @anpost.ie> <nv-l@lists.us.ibm.com>
> Sent by: cc
> owner-nv-l@lists.
> us.ibm.com Subject
> RE: [nv-l] Set Severity in
> Routerup_ev
> 02/25/2005 08:37
> AM
>
>
> Please respond to
> nv-l
>
>
>
>
>
>
> Tom,
>
> You could try modifying the tec_slot value for severity and see does
> that give the desired results
> (Go to Event Configuration -> select the ROUTERUP_EV -> Modify -> select
> the T/EC Slot Map... Button and change the severity there)
>
> I hav'nt tried this myself, but it may suit your needs.
>
>
> Regards
>
> Colin Mulkerrins
> Enterprise Systems Management
> An Post
>
>
>
> -----Original Message-----
> From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
> On Behalf Of Tom Hallberg
> Sent: 25 February 2005 13:10
> To: nv-l@lists.us.ibm.com
> Subject: [nv-l] Set Severity in Routerup_ev
>
>
> Hi
>
> I need to specify the severity lvl for some events befor I forward it to
> TEC. Because right now when I get, for example, ROUTERUP_EV (I think
> thats the right event), TEC dosent know which severity that event has.
>
>
> So should I edit any file for this or should I make this change in
> Ruleset Editor? If so, which file or what kind of object in RE?
>
> Thank you
>
> //Tom
>
>
>
> ***********************************************************************************
>
> This e-mail and its attachments, is confidential and is intended for the
> addressee(s) only. If you are not the intended recipient, disclosure,
> distribution or any action taken in reliance on it is prohibited and may be
> unlawful. Please note that any information expressed in this message or its
> attachments is not given or endorsed by An Post unless otherwise indicated
> by an authorised representative independently of this message. An Post does
> not accept responsibility for the contents of this message and although it
> has been scanned for viruses An Post will not accept responsibility for any
> damage caused as a result of a virus being passed on.
> ***********************************************************************************
>
>
>
>
|