--- Mario Behring <mariobehring@yahoo.com> wrote:
> Date: Thu, 18 Aug 2005 07:09:05 -0700 (PDT)
> From: Mario Behring <mariobehring@yahoo.com>
> Subject: RE: [tme10] NV714 - nvserverd error when trying to send events
> to TEC
> To: tme10@lists.us.ibm.com
>
> Loren...you were right about the two sub-source thing !!
>
> Actually, there is a sub-source field defined with a fixed value ("JOB")
> at the "TEC Slot Map..." button in the "Modify Event" / "Event
> Configuration" option in the NetView GUI. But there is also another
> field
> in the "Modify Event" window called "Source Character", which is filled
> with a "B"...as you saw in the event below.
>
> I do not know what this "Source Character" field stands for...but I
> cannot
> let it unfilled...and I kind of needed the other one (the JOB value).
>
> Thank you.
>
> Best regards,
>
> Mario
>
> --- Loren Cain <loren.cain@digiconasp.com> wrote:
>
> > You have two sub_source slots in the event. Maybe
> > the state correlation engine is choking on that.
> >
> > Loren Cain
> > Digicon
> >
> > -----Original Message-----
> > From: owner-tme10@lists.us.ibm.com
> [mailto:owner-tme10@lists.us.ibm.com]
> > On Behalf Of Mario Behring
> > Sent: Wednesday, August 17, 2005 5:32 PM
> > To: tme10@lists.us.ibm.com
> > Subject: Re: [tme10] NV714 - nvserverd error when trying to send
> events
> > to TEC
> >
> > Gentlemen,
> >
> > I´ve uncommented the lines below from the tecint.conf file:
> >
> > ## The following four lines are for debugging the state correlation
> > engine
> > LogLevel=ALL
> > TraceLevel=ALL
> > LogFileName=/usr/OV/log/adptlog.out
> > TraceFileName=/usr/OV/log/adpttrc.out
> >
> > Here is part of the output from the /usr/OV/log/adptlog.out file.
> Looks
> > like the events are being dropped for some reason...
> >
> > 2005.08.17 18:22:08.920 com.tivoli.tec.event_delivery.TECEvent convert
> > Dropping an event because it is ill-formed:
> >
>
MF_ABEND;source=nvserverd;sub_source=B;origin=10.10.10.10;adapter_host=10.10.10.10;hostname=ca81;category=20;date="08/17/05
> > 18:22:08";status=OPEN;msg="BWR03CO2 U0102 CA81 BW STEP0204 102
> > ";sub_source=JOB;severity=MINOR;msg_catalog=SC;END
> >
> > Any ideas ??
> >
> > Thanks.
> >
> > Mario
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --- Ralph Baldwin <baldwinr@us.ibm.com> wrote:
> >
> > > It's a connection problem, tec_errno=826 translates into ...
> > >
> > > ED_ERR_TRANSPORT_CONTROLLER 826
> > Unable
> > > to
> > > initialize the transport controller
> > >
> > > If you're using an hostname or IP address to connect, try specifying
> > the
> > >
> > > TEC listener port. That can be found via ...
> > >
> > > rpcinfo -p | grep 100033057
> > >
> > > on the TEC server.
> > >
> > > Cheers,
> > >
> > > Ralph Baldwin
> > >
> > > Internet email: baldwinr@us.ibm.com
> > > Advisory Software Engineer
> > > IBM Software Group - Tivoli Software
> > > Performance & Availability
> > > Office: 512-286-3665
> > >
> > >
> > >
> > > Mario Behring <mariobehring@yahoo.com>
> > > Sent by: owner-tme10@lists.us.ibm.com
> > > 08/17/2005 01:22 PM
> > > Please respond to
> > > tme10
> > >
> > >
> > > To
> > > tme10@lists.us.ibm.com, NetView List <nv-l@lists.us.ibm.com>
> > > cc
> > >
> > > Subject
> > > [tme10] NV714 - nvserverd error when trying to send events to TEC
> > >
> > >
> > >
> > >
> > >
> > >
> > > Hi lists,
> > >
> > > I am getting the following error at the nvserverd.log when using the
> > > internal NetView adapter to send events to TEC:
> > >
> > > 08/17/05 14:06:28 Call to tec_create_handle failed, tec_errno = 826
> > > 08/17/05 14:06:43 Call to tec_create_handle failed, tec_errno = 826
> > >
> > > I´ve searched the IBM website for some answers, but I couldn´t find
> > > anything. Have anyone seen this error ? Looks like that there may be
> > > related to the configuration file (tecint.conf), which is like this:
> > >
> > > "../conf/tecint.conf" 17 lines, 574 characters
> > > ServerLocation=<TEC ip address>
> > > TecRuleName=newrule3.rs
> > > ServerPort=0
> > > DefaultEventClass=TEC_ITS_BASE
> > > BufferEvents=YES
> > > BufEvtPath=/etc/Tivoli/tec/cache
> > > UseStateCorrelation=YES
> > > StateCorrelationConfigURL=file:///usr/OV/conf/nvsbcrule.xml
> > > ## The following four lines are for debugging the state correlation
> > > engine
> > > # LogLevel=ALL
> > > # TraceLevel=ALL
> > > # LogFileName=/usr/OV/log/adptlog.out
> > > # TraceFileName=/usr/OV/log/adpttrc.out
> > > ## The following three lines alter nvserverd default behavior
> > > # NvserverdTraceTecEvents=YES
> > > # NvserverdPrimeTecEvents=NO
> > > # NvserverdSendSeverityTecEvents=YES
> > >
> > > Any help is appreciated.
> > >
> > > Thanks.
> > >
> > > Mario
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Tired of spam? Yahoo! Mail has the best spam protection around
> > > http://mail.yahoo.com
> > >
> > >
> >
> >
> >
> >
> > ____________________________________________________
> > Start your day with Yahoo! - make it your home page
> > http://www.yahoo.com/r/hs
> >
> >
> >
>
>
>
>
> ____________________________________________________
> Start your day with Yahoo! - make it your home page
> http://www.yahoo.com/r/hs
>
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
|