[Top] [All Lists]

[nv-l] Pb with messages on NV 7.1.4

To: nv-l@lists.us.ibm.com
Subject: [nv-l] Pb with messages on NV 7.1.4
From: Maxime TRANNOY <MTRANNOY@fr.ibm.com>
Date: Fri, 26 Aug 2005 16:01:52 +0200
Delivery-date: Fri, 26 Aug 2005 15:04:46 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
In-reply-to: <OFD3F15069.DB18755E-ON45257069.00486734-45257069.0047F0C3@s-iii.com>
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Hello all,

I've just installed a new server with 7.1.4 FP3 on AIX.
As usual I use my addtrap script to add my specific traps
and check in the /C/trap.conf to see if the result was correct
%PM-4-ERR_DISABLE {} 6 8000 A 4 0 "Error Events"
[chars] error detected on [chars], putting [chars] in err-disable state.

Then I send a trap to test my addtrap command.

The result in the trapd.log was correct

1125061147 2 Fri Aug 26 14:59:07 2005 Test device       A link-flap error
detected on Fa1/0/10, putting Fa1/0/10 in err-disable state

but on the control desk I did not see the message???? only the 2 field Test
Device A and the rest of the line is blank.

In the nvserd.log I found that the field msg  was empty. But normally with
my trap description msg field should be equal to $2. It was the normal
behaviour in 7.1.3?

08/26/05 14:59:07
 error detected on Fa1/0/10, putting Fa1/0/10 in err-disable state";END

Can someone explain me what is the problem and how can I my message back on
my GUI.


IGS - Network Delivery Support Center
Tel : +33 (0) 492 114 767

<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web