Mario,
NetView is looking at the ifAdmin status of the interface, if it is
ifAdmin down,
netmon will mark it as User 1(Admin down). All I can imagine is the
other routers
are not properly setting the ifAdmin mib variable for the Serial 0
interface.
Paul
Mario Behring wrote:
Hi all,
I have several routers in my environment that are using its Serial 0
interface as backup line for a Frame-Relay link connected to its other
interface (Serial 1.1 mostly). For some of these routers, NetView
gives the S0 interface a USER1 status (pink), thus showing the router
object as UP (green) in the map, even the OperStatus being DOWN, as it
should be.
Conversely, for other routers, the Serial 0 interface status is DOWN
(red), and the router icon is MARGINAL (yellow) because of it.
There are no differences whatsoever between these routers that I can
tell............how can I make NetView see all S0 interfaces status
from these routers s USER1 ??
Thank you.
Mario
------------------------------------------------------------------------
Yahoo! for Good
Click here to donate <http://store.yahoo.com/redcross-donate3/> to the
Hurricane Katrina relief effort.
|