nv-l
[Top] [All Lists]

RE: [nv-l] ? about netviewd process for Web Console

To: <nv-l@lists.us.ibm.com>
Subject: RE: [nv-l] ? about netviewd process for Web Console
From: "Glen Warn" <Glen.Warn@pemcocorp.com>
Date: Tue, 28 Mar 2006 10:39:36 -0800
Delivery-date: Tue, 28 Mar 2006 19:40:26 +0100
Envelope-to: nv-l-archive@lists.skills-1st.co.uk
Reply-to: nv-l@lists.us.ibm.com
Sender: owner-nv-l@lists.us.ibm.com
Thread-index: AcZSlPPbXOqC5q6RRdaIXvMDVQQfvAAANkLwAABJX6A=
Thread-topic: [nv-l] ? about netviewd process for Web Console
Thanks - works like a champ!!

-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Evans, Bill
Sent: Tuesday, March 28, 2006 10:34 AM
To: nv-l@lists.us.ibm.com
Subject: RE: [nv-l] ? about netviewd process for Web Console

Short workaround.  Start the NETVIEWD daemon automatically.  As soon as
it is up start a RW session with the "netview -dconsole" command.
NETVIEWD will lurk in the background and take the session back when your
"dconsole" session dies.  

The disadvantage of running NETVIEWD with a read-only map is that some
changes are not reflected to the web console; i.e. manage/unmanage
changes.  

Bill Evans
DOE NetView Support
301 903 0057 -- office
570-639-5691 -- home
570-852-9549 -- cell



-----Original Message-----
From: owner-nv-l@lists.us.ibm.com [mailto:owner-nv-l@lists.us.ibm.com]
On Behalf Of Glen Warn
Sent: Tuesday, March 28, 2006 1:25 PM
To: nv-l@lists.us.ibm.com
Subject: [nv-l] ? about netviewd process for Web Console


Hi,

 

I running NV 7.1.4 FP3 on RH Linux AS 2.1

 

I've recently started deploying Web consoles for a handful of people and
it works very well - except for a few issues.  I typically have a RW
copy of the map open (the only map BTW).  I need this access to
add/delete/unmanage nodes.  Occasionally, my Xsession gets blown out and
when this happens people cannot access the web console.  The fix for
this is to start netviewd (I believe).  The problem I have with this is
- this process takes the RW control of the map and I am restricted to
RO.  Is there a way to have netviewd run only with a RO map?

 

If not, does anyone have a better idea than me starting and stopping the
process (actually even this doesn't work for me I have to use NVsetup
and reconfig web server) every time I need access to RW map?

 

Thanks,

Glen







<Prev in Thread] Current Thread [Next in Thread>

Archive operated by Skills 1st Ltd

See also: The NetView Web