[nv-l] snmpCollect Stopped Collecting after Upgrade

["Ardino III, Frank J CPC43" <Frank.Ardino@CIGNA.COM>]

Hi All,

This is a weird one, I was wondering if anyone had any ideas. I have it into support, but response is very slow, I submitted 4/11 only been asked to provide an snmpwalk. I upgraded existing NetView 7.1.3 to 7.1.4 FP3. Now my snmpCollect refuses to collect on locIfInBitsSec & locIfOutBitsSec. Everything else I had collecting picked right up after the upgrade. I deleted and re-configured, removed the list of routers and just setup to collect on one. Still nothing! I’m stumped! Any ideas would be appreciated.

Thanks,

Frank J. Ardino III
Sr. Infrastructure Engineer Specialist
Enterprise Network & Systems Mgmt.
Product Technical Support  
856.346.5844 or x-45844
frank.ardino@cigna.com

 

Confidential, unpublished property of CIGNA. Do not duplicate or distribute. Use and distribution limited solely to authorized personnel. © Copyright 2006 CIGNA

------------------------------------------------------------------------------
CONFIDENTIALITY NOTICE: If you have received this email in error, please immediately notify the sender by e-mail at the address shown. This email transmission may contain confidential information. This information is intended only for the use of the individual(s) or entity to whom it is intended even if addressed incorrectly. Please delete it from your files if you are not the intended recipient. Thank you for your compliance. Copyright 2006 CIGNA
==============================================================================